Area Converter formula — how it actually works
The Area Converter does not look anything up. It multiplies your number by a fixed factor, and when the two units are not directly related it goes through square metres as a middle step: convert the starting unit to square metres, then convert square metres to the target unit.
Why the area factor is the length factor squared
One metre is 3.28084 feet. A square metre is a square one metre on each side, so in feet it is 3.28084 feet by 3.28084 feet. Its area in square feet is therefore 3.28084 × 3.28084 = 10.7639 square feet. That is why the area factor (10.7639) is much bigger than the length factor (3.28084) — area grows with the square of the length.
1 sq m = 3.28084 ft × 3.28084 ft = 10.7639 sq ft
The factors the converter uses
Every conversion on the tool comes from these fixed numbers: 1 sq m = 10.7639 sq ft; 1 sq ft = 0.092903 sq m; 1 sq yd = 9 sq ft = 0.836127 sq m; 1 acre = 43,560 sq ft = 4,046.86 sq m = 0.404686 ha; 1 hectare = 10,000 sq m = 2.47105 acres; 1 sq km = 100 ha = 247.105 acres. Square yards are a neat case: a square yard is 3 feet by 3 feet, so 3 × 3 = 9 square feet.
Worked example — acres to square feet, via square metres
Convert 2 hectares to square feet. First turn hectares into square metres (2 × 10,000 = 20,000 sq m), then square metres into square feet:
2 ha = 20,000 sq m 20,000 sq m × 10.7639 = 215,278 sq ft
As a check, 2 hectares is 4.94211 acres, and 4.94211 × 43,560 = 215,278 square feet — the same answer by the other route.
At a glance
The mistake to avoid
Converting an area with a length factor. It is the single most common error in area conversion, and it is easy to make because 3.28084 is the number most people remember. For area, always square it first: 10.7639, not 3.28084.
Frequently asked questions
What is the formula for square metres to square feet?
Multiply square metres by 10.7639. The factor is 3.28084 squared, because area is length times length.
Why does the converter go through square metres?
Square metres sit in the middle of the unit system, so every unit has one fixed factor to and from square metres. Two multiplications cover every pair of units.
How many square feet are in a square yard?
9 square feet. A square yard is 3 feet by 3 feet, so 3 × 3 = 9.
Is the conversion exact?
The factors used here are the standard rounded values, such as 10.7639 and 0.092903. They are accurate to the decimals shown, which is enough for rooms, plots and homework.
More guides on the Area Converter
- How to use the Area Converter — step by step
- Area Converter explained with worked examples
- Area Converter for beginners — start here
- Common mistakes people make with the Area Converter
- Area Converter vs doing it by hand — which is faster?
- area converter — the complete guide
- How to get an accurate result from the Area Converter
- Area Converter for students — with examples
- Area Converter for homeowners and DIYers
Check the formula on a number of your own with the Area Converter — free, in your browser.