← All blog posts

Area Converter for homeowners and DIYers

WhiteUI · A plain-English guide to the Area Converter

Home projects run on areas: the floor you are tiling, the lawn you are turfing, the plot you are buying. The Area Converter turns the number on the listing or the tape measure into the unit your supplier quotes in, so you order the right amount the first time.

Room sizes

Measure the length and width of the room, multiply them, and you have the area. A bedroom 12 feet by 10 feet is 120 square feet. Flooring is often priced per square metre, so convert it:

120 sq ft × 0.092903 = 11.1484 sq m

Order for 11.1484 square metres, then add about 10 percent for cuts and waste — roughly 12.3 square metres in total. The waste allowance is not the converter’s job; the conversion is.

Plot sizes

Land is usually listed in acres, hectares or square metres, and the three are easy to confuse. A 0.5-hectare plot is 5,000 square metres (0.5 × 10,000), which is 53,819.5 square feet. Before you compare two plots, convert both to the same unit — a “bigger” number in square feet can be a smaller plot than a modest number in hectares.

At a glance

0.5 ha = 5,000 sq m0.5 ha5,000 sq mSame area — 0.5 ha = 5,000 sq m
0.5 ha and 5,000 sq m describe exactly the same patch of ground; only the unit changes.

Buying flooring and tiles

Tiles and laminate are sold by the square metre or the square foot, and the box tells you its coverage in one unit only. Work out the room’s area, convert it to the box’s unit, divide by the coverage per box, and round up to whole boxes — never down. A room of 11.1484 square metres with boxes covering 2 square metres each needs 6 boxes (11.1484 ÷ 2 = 5.57, rounded up), not 5.

The mistake to avoid

Ordering by the length instead of the area. A 12 × 10 ft room is not “12 square feet” or “22 square feet” — it is 120 square feet. And a square yard of carpet is 9 square feet, not 3: ordering 50 square yards as 150 square feet leaves you 300 square feet short.

Frequently asked questions

How do I work out how much flooring I need?

Multiply the room’s length by its width to get the area, convert it to the unit the flooring is sold in, then add about 10 percent for cuts and waste.

My plot is 0.5 hectares — how big is that in square metres?

5,000 square metres. One hectare is 10,000 square metres, so 0.5 × 10,000 = 5,000. That is 53,819.5 square feet.

A room is 12 × 10 ft — how many square metres is that?

11.1484 square metres. The room is 120 square feet, and 120 × 0.092903 = 11.1484.

How many boxes of tiles do I need?

Divide the room’s area by one box’s coverage and round up to whole boxes. A 11.1484 sq m room with 2 sq m boxes needs 6 boxes, not 5.

More guides on the Area Converter

Try it yourself

Measure your room, then convert it on the Area Converter — free, in your browser.

Open the Area Converter