The complete guide to reading time
Reading time is one of the simplest calculations there is, and this guide covers all of it: the formula, how to measure your speed, what the answer means, and how to turn it into a plan for a book, a course or an exam. Nothing here needs more than division. The Reading Time Calculator does the same calculation with sliders, and it defaults to 60,000 words at 200 words per minute — 5 hours.
Step 1: count the words
Everything starts with the word count. A file usually tells you its word count directly; a printed book does not, so estimate it from the pages. A typical paperback page holds about 250–300 words, so a 240-page book is roughly 240 × 250 = 60,000 words. A dense textbook page can hold more, and a book with wide margins and short paragraphs can hold fewer. Use the real count when you have it, and say which figure you used when you do not, because the word count sets the whole answer: double the words and the time doubles.
Step 2: measure your speed
Your speed is words per minute, written wpm. An average adult reads about 200–250 wpm for ordinary prose and about 150 wpm for dense or technical material. Do not guess it — measure it. Read a normal passage at your usual pace, count the words and divide by the minutes it took: 600 words in 3 minutes is 600 ÷ 3 = 200 wpm. Measure it on the kind of material you are about to read, because a novel and a textbook will give different speeds, and the speed you use decides the answer more than anything else.
minutes = words ÷ words per minute hours = minutes ÷ 60
Step 3: divide, then convert
Divide the words by your speed to get minutes, then divide the minutes by 60 to get hours. For 60,000 words at 200 wpm: 60,000 ÷ 200 = 300 minutes, and 300 ÷ 60 = 5 hours. For 50,000 words at the same speed: 50,000 ÷ 200 = 250 minutes, which is 4 h 10 min — the remainder after dividing by 60 is the minutes, so 250 is 4 hours with 10 minutes left over. Keep the full number through the division and round only at the end, so a result like 225 minutes becomes 3 h 45 min exactly.
Step 4: read the answer properly
The answer is pure reading time. A 5-hour result means 5 hours with your eyes on the page, not 5 hours from sitting down to standing up. Breaks, re-reading and note-taking all sit on top of it. If you add a 10-minute break every hour, a 5-hour reading time takes about 5 h 50 min of clock time. The answer is also a planning number, not a promise: it assumes a steady speed, and real reading speeds up and slows down with the material.
Turning the answer into a plan
Divide the total minutes by the minutes you read each day. A 90,000-word book takes 90,000 ÷ 200 = 450 minutes, or 7 h 30 min. At 45 minutes a day that is 450 ÷ 45 = 10 days. At 2 hours a day you cover 2 × 60 × 200 = 24,000 words a day, so the same book takes 90,000 ÷ 24,000 = 3.75 days — four days, rounding up. Work the other way round too: if you have 5 days and a 45,000-word book, you need 45,000 ÷ 200 = 225 minutes in total, or 45 minutes a day, and at 250 wpm it drops to 180 minutes, or 36 minutes a day.
What the answer cannot tell you
Reading time cannot tell you how well you will understand what you read, how much you will remember, or how long the notes will take. A chapter you need to master will take longer than its reading time, and a novel you are reading for pleasure will feel shorter than its reading time. The number is a starting point for planning, not a measure of learning. Use it to set the hours, then add the time for thinking, re-reading and writing, and the plan will hold.
Frequently asked questions
What is the reading time formula?
Minutes = words ÷ words per minute, then hours = minutes ÷ 60. For 60,000 words at 200 wpm, that is 300 minutes, or 5 hours.
What is a good reading speed?
About 200–250 words a minute for ordinary prose, and about 150 wpm for dense or technical material. Measure your own speed on the material you actually read.
How long does a 90,000-word book take to read?
7 h 30 min at 200 wpm. At 45 minutes a day that is 10 days, and at 2 hours a day it is about 4 days.
Does reading time include breaks?
No. It is pure reading time. Add breaks separately: 5 hours of reading with a 10-minute break every hour takes about 5 h 50 min of clock time.
More guides on the Reading Time Calculator
Try the Reading Time Calculator — free, in your browser.