Reading Time in books and exam prep
Books and exams are the two places where reading time stops being a curiosity and starts being a plan. A novel has a word count, and an exam has a syllabus, and both can be turned into hours and then into days. This guide works through both, with real numbers at 200 words a minute and at the slower speeds that dense material deserves. Check your own book on the Reading Time Calculator, which takes the word count and your speed and returns the time in hours and minutes.
How long does a novel take to read?
A typical novel runs 80,000–90,000 words. Take an 85,000-word novel at 200 words a minute: 85,000 ÷ 200 = 425 minutes, which is 7 h 05 min. A fast reader at 250 wpm finishes it in 85,000 ÷ 250 = 340 minutes, or 5 h 40 min, and a slower reader at 150 wpm takes 85,000 ÷ 150 = 566.67 minutes, or about 9 h 27 min. The same book, three readers, a gap of nearly four hours between the fastest and the slowest. A long novel of 300,000 words takes 1,500 minutes at 200 wpm, which is 25 hours — a week of evenings, not a weekend.
Turning a book into a daily plan
Divide the total time by the minutes you read each day. A 75,000-word book takes 75,000 ÷ 200 = 375 minutes, or 6 h 15 min, to read. At 30 minutes a day, that is 375 ÷ 30 = 12.5 days, so 13 days to finish. At 20 minutes a day it is 375 ÷ 20 = 18.75 days, so 19 days. The book is 75,000 ÷ 250 = 300 pages, so the 13-day plan means about 300 ÷ 13 = 23 pages a day. Pick the daily minutes first, then let the division set the finish date — not the other way round.
Exam prep: reading the syllabus on time
Exam reading is the same calculation with a stricter deadline. Suppose your revision notes run to 40 pages at 300 words a page: 40 × 300 = 12,000 words. At 200 wpm that is 12,000 ÷ 200 = 60 minutes, exactly 1 hour. At 180 wpm, a fairer speed for material you are trying to learn rather than just read, it is 12,000 ÷ 180 = 66.67 minutes, or about 1 h 7 min. That is the reading time only. Revision means reading, recalling and testing yourself, so plan two or three times the reading time for the full job: a 1-hour read becomes a 2–3 hour revision session.
minutes = words ÷ words per minute days = total minutes ÷ minutes per day
When the deadline is fixed
Sometimes the finish date is set and the daily minutes are the unknown. Take a 120,000-word syllabus and 5 days to read it: the total time is 120,000 ÷ 200 = 600 minutes, or 10 hours, so you need 600 ÷ 5 = 120 minutes a day — 2 hours a day for 5 days. If you only have 45 minutes a day, the same syllabus takes 600 ÷ 45 = 13.33 days, so 14 days, and a 5-day deadline means reading faster, reading longer, or accepting that you will not finish. The calculation does not negotiate; it tells you the trade-off plainly, while there is still time to act on it.
The common mistake: planning in pages, not minutes
“Twenty pages a day” sounds like a plan, but a page of dense textbook and a page of a novel are different jobs. Twenty pages at 300 words a page is 6,000 words, which takes 30 minutes at 200 wpm; twenty pages at 250 words a page is 5,000 words, which takes 25 minutes. The page count hides the difference, and the difference grows over a whole book. Plan in minutes and words, and use pages only to track where you are in the book.
Frequently asked questions
How long does it take to read an 85,000-word novel?
7 h 05 min at 200 words a minute. At 250 wpm it takes 5 h 40 min, and at 150 wpm it takes about 9 h 27 min.
How many days does a 75,000-word book take at 30 minutes a day?
13 days. The total reading time is 6 h 15 min, and 375 minutes divided by 30 minutes a day is 12.5 days.
How long does a 300,000-word book take to read?
25 hours at 200 wpm. That is a week of evenings, not a weekend.
How do I plan exam reading with a fixed deadline?
Work out the total minutes, then divide by the days. A 120,000-word syllabus takes 10 hours at 200 wpm, so 5 days means 2 hours a day.
More guides on the Reading Time Calculator
Try the Reading Time Calculator — free, in your browser.