← All blog posts

Reading Time FAQs answered

WhiteUI · A plain-English guide to the Reading Time Calculator

These are the questions people actually ask about reading time, answered with numbers instead of general advice. Each answer uses the same formula the Reading Time Calculator uses — minutes = words ÷ words per minute — so you can check every figure yourself. If your question is not here, the worked examples below cover the same ground from a different angle.

Five quick answers: 50,000 words take 4 hours 10 minutes, 100,000 words take 8 hours 20 minutes, and a 300,000 word book takes 25 hours at 200 words per minute
At 200 words a minute: 50,000 words take 4 h 10 min, 100,000 take 8 h 20 min and 300,000 take 25 h.

How long does it take to read 50,000 words?

At 200 words a minute, 50,000 ÷ 200 = 250 minutes, which is 4 h 10 min. At 150 wpm it takes 333.33 minutes, or 5 h 33 min, and at 250 wpm it takes 200 minutes, or 3 h 20 min. The range matters: 50,000 words is a short novel or a long report, and the difference between a slow and a fast reader on it is more than two hours. Quote the speed alongside the time, or the time means very little.

How long does it take to read 100,000 words?

At 200 wpm, 100,000 ÷ 200 = 500 minutes, which is 8 h 20 min. That is a full-length novel, and it is more reading than most people do in a single day. Spread over a week at 1 h 20 min a day, it is 6 days: 500 ÷ 80 = 6.25 days. At 250 wpm the same book takes 400 minutes, or 6 h 40 min, and at 150 wpm it takes 666.67 minutes, or 11 h 7 min.

Does reading time include breaks?

No. The calculator gives pure reading time, with your eyes on the page. A 300-minute result means 5 hours of reading, not 5 hours from sitting down to standing up. Add a 10-minute break every hour and the clock time for the same job is about 5 h 50 min. If you are planning a day around a reading target, always add the breaks after the calculation, not before it.

Why do two calculators give different answers?

Because they use different speeds. One calculator may default to 200 wpm and another to 250 wpm, and on 60,000 words that is the difference between 5 h and 4 h. Both are right for their own speed. Before comparing two results, check the speed each one used. The same applies to people: two readers finishing the same book in different times are usually reading at different speeds, not reading different books.

How many pages is an hour of reading?

At 200 wpm you read 12,000 words an hour, which is 48 pages at 250 words a page. At 150 wpm you read 9,000 words an hour, or 36 pages, and at 250 wpm you read 15,000 words an hour, or 60 pages. These are guides, not guarantees: a page of dense textbook holds more words than a page of a novel with short paragraphs, so the page count moves even when the time does not.

How do I work out my own reading speed?

Pick a normal passage, count its words, and time yourself reading it once at your usual pace. If you read 600 words in 3 minutes, your speed is 600 ÷ 3 = 200 wpm. If you read 450 words in 3 minutes, it is 150 wpm. Do it on the kind of material you actually read — a novel and a textbook will give different speeds — and use the result instead of the 200 wpm default whenever the answer matters.

Frequently asked questions

How long does it take to read 50,000 words?

4 h 10 min at 200 words a minute. At 150 wpm it takes 5 h 33 min, and at 250 wpm it takes 3 h 20 min.

How long does it take to read 100,000 words?

8 h 20 min at 200 wpm. That is a full-length novel, or about 6 days at 1 h 20 min a day.

Does reading time include breaks?

No. It is pure reading time. A 5-hour reading time with a 10-minute break every hour takes about 5 h 50 min of clock time.

Why do two calculators give different answers?

They use different speeds. On 60,000 words, 200 wpm gives 5 h and 250 wpm gives 4 h, and both are right for their speed.

How many pages is an hour of reading?

At 200 wpm you read 12,000 words an hour, which is about 48 pages at 250 words a page.

More guides on the Reading Time Calculator

Try it yourself

Try the Reading Time Calculator — free, in your browser.

Open the Reading Time Calculator