← All blog posts

How to use a cricket run rate calculator

WhiteUI · A plain-English guide to the Cricket Run Rate Calculator

A run rate calculator takes four numbers and gives back three answers. It is a small tool, but it repays knowing what each box means, because the overs box is the one place where cricket’s way of writing numbers trips people up. This guide walks through the Cricket Run Rate Calculator box by box, using its own starting numbers, so you can use it during a match without guessing.

Four boxes: runs 180, overs 30, target 250, and the answers starting with 6.00
Enter runs, overs, target and overs left; the calculator answers with the current rate, the required rate and the projected score.

The four boxes

The calculator asks for four numbers. Runs scored is the team’s total so far, including extras. Overs played is how many overs have been bowled, written the cricket way. Target is the total the batting side is chasing, or the total you want to compare against. Overs remaining is how many overs are left in the innings. When the page opens it is already filled in with an example: 180 runs in 30 overs, a target of 250, and 20 overs left. Change any box — by typing or by moving its slider — and the answers update at once.

Entering overs the cricket way

Type overs exactly as the scoreboard writes them: the part after the point is balls, not a decimal. Type 30.3 for 30 overs and 3 balls, and the calculator converts it to 183 balls before dividing. Type 15.3 and it uses 15.5 overs, not 15.3. This is the single most useful thing the tool does, because doing the conversion by hand is where most run rate errors come from. If you type a number with more than five balls after the point, it will not make sense as cricket overs — the digit after the point can only be 0 to 5.

Reading the three answers

The big number is the current run rate. With the starting figures of 180 runs in 30 overs it reads 6.00. Underneath it are the other two answers. The required run rate is the pace still needed to reach the target: (250 − 180) ÷ 20 = 3.50. The projected score assumes the current rate continues: 180 + (6.00 × 20) = 300. A third line shows the runs still needed — 70 in 20 overs. Read them together: the team is scoring faster than it needs to, and on current form it will finish well past the target.

A chase in real time

Try a live chase. A team is 180 for 3 after 30 overs of a 50-over game, chasing 280. It needs 100 runs from 20 overs, a required rate of 5.00. Enter 180 runs, 30 overs, a target of 280 and 20 overs left, and the calculator shows a current rate of 6.00, a required rate of 5.00 and a projected score of 300. As the overs tick down, update the boxes and watch the required rate move: every dot ball pushes it up a fraction, every boundary pulls it down. That is the number to keep an eye on while a chase is running.

What the calculator does not do

The tool does not use Duckworth-Lewis-Stern, so if rain has cut the overs and the target has been adjusted, enter the adjusted target yourself — the calculator works with the target as set. It does not consider wickets: a team on 180 for 1 and a team on 180 for 9 get the same answers, because the maths only uses runs and overs. And the projected score is not a prediction; it assumes the current rate holds steady, which it rarely does. Use the three answers as a reading of the game, not as a forecast of how it will end.

Frequently asked questions

What four numbers does the calculator need?

Runs scored, overs played, target, and overs remaining. From those it works out the current rate, the required rate and the projected score.

How do I enter 30.3 overs?

Type 30.3 exactly as the scoreboard writes it. The calculator reads the .3 as 3 balls and converts it to 30.5 overs before dividing.

What is the projected score?

The runs scored plus the current run rate multiplied by the overs remaining. With 180 at 6.00 and 20 overs left, it is 180 + 120 = 300.

Does the calculator handle rain-affected targets?

It works with whatever target you enter, so enter the Duckworth-Lewis-Stern adjusted target yourself. It does not calculate DLS targets.

More guides on the Cricket Run Rate Calculator

Try it yourself

Try the Cricket Run Rate Calculator — free, in your browser.

Open the Cricket Run Rate Calculator