← All blog posts

Cricket Run Rate quick reference table

WhiteUI · A plain-English guide to the Cricket Run Rate Calculator

Sometimes you do not want to work a run rate out — you want to look it up. This reference table covers the totals that come up most often in T20 and 50-over cricket, so you can check a score against its rate in seconds and get back to watching the match. Every figure in the tables below is runs divided by overs, worked out the same way the Cricket Run Rate Calculator does it, with part overs converted to balls first.

Bar chart of 20-over totals: 120 runs is 6.00, 150 is 7.50, 160 is 8.00, 180 is 9.00
20-over totals at a glance: 120 is 6.00, 150 is 7.50, 160 is 8.00 and 180 is 9.00 runs per over.

20-over totals

Runs in 20 oversRun rate
1206.00
1407.00
1507.50
1608.00
1708.50
1809.00
20010.00

In a T20, 160 is around par on most grounds, which is a rate of 8.00. Below 140 the batting side has left the bowlers too much to do; above 180 the chasing side is under real pressure from the first over. A rate of 10.00 means a total of 200, which is a big score in any T20.

50-over totals

Runs in 50 oversRun rate
2004.00
2505.00
2755.50
3006.00
3256.50
3507.00

In a 50-over game, 250 is 5.00 and 300 is 6.00. Most competitive first-innings totals sit between those two numbers, so a rate between 5.00 and 6.00 after 50 overs is a par score. Above 6.50 the batting side has had a very good day; below 4.50 the bowlers have been on top.

Part overs and other lengths

Not every innings ends on a round number of overs. Two useful ones: 132 runs in 16 overs is 132 ÷ 16 = 8.25, a strong T20 pace, and 210 runs in 40 overs is 210 ÷ 40 = 5.25, a steady 50-over pace. And remember the part-over trap: 86 runs in 10.4 overs is 86 ÷ 10.667 = 8.06, because 10.4 overs is 64 balls. If a score is not in the tables, divide the runs by the overs — or put the numbers into the calculator.

Required rate at a glance

Runs neededOvers leftRequired rate
60106.00
80204.00
75107.50
4058.00
3666.00

Read this table the other way round from the first two: the runs column is what is still needed, not what has been scored. Needing 36 off the last 6 overs is a required rate of 6.00 — one run per ball. Needing 40 off 5 overs is 8.00, which means a boundary roughly every over. When the required rate climbs above 10.00, the chasing side needs more than a run a ball, and the game is slipping away.

How to use the tables during a match

Keep the 20-over table in mind when a T20 is on: after 10 overs, double the score and look it up. A team on 85 after 10 overs is heading for 170 if it keeps the same pace, which is a rate of 8.50. In a 50-over game, check the rate at the halfway mark instead: a team on 130 after 25 overs is scoring at 5.20, and doubling the score gives a rough projected total of 260. The required-rate table works best in the last ten overs, when the numbers are small enough to hold in your head. Needing 60 from 10 overs is 6.00 per over — one run a ball. Needing 45 from 5 overs is 9.00, which means a boundary in most overs. If the numbers do not match a row in the table, divide the runs by the overs, or open the calculator and type the figures in.

Frequently asked questions

What is a par score in a T20?

Around 160, which is a run rate of 8.00. Below 140 is below par and above 180 is a strong total.

What run rate is 300 in a 50-over game?

6.00. 300 ÷ 50 = 6.00, which is a competitive first-innings total on most grounds.

How do I read the required rate table?

Find the runs still needed and the overs left, and the table gives the rate. 36 needed off 6 overs is 6.00 per over.

Why is 86 in 10.4 overs 8.06 and not 8.27?

Because 10.4 overs is 10 overs and 4 balls, or 64 balls, which is 10.667 overs. 86 ÷ 10.667 = 8.06.

More guides on the Cricket Run Rate Calculator

Try it yourself

Try the Cricket Run Rate Calculator — free, in your browser.

Open the Cricket Run Rate Calculator