← All blog posts

How to calculate average speed

WhiteUI · A plain-English guide to the Speed Calculator

Average speed answers one question: how fast did something travel overall, from start to finish? A car that covers 150 kilometres in 2 hours has an average speed of 75 kilometres per hour, even if it went faster on the open road and slower through towns. It divides the total distance by the total time, stops included, so it describes the whole trip rather than any one stretch of it. This guide works through the method once, with real numbers, so you can repeat it for any trip, run or ride.

A bar showing 150 kilometres covered in 2 hours, giving an average speed of 75 kilometres per hour
150 kilometres in 2 hours works out at 75 kilometres per hour. The bar shows the whole trip, not the fastest moment.

The one formula you need

Average speed = total distance ÷ total time

That is the whole method. Measure the distance, measure the time, and divide the first by the second. The units follow from what you put in: kilometres divided by hours gives kilometres per hour, metres divided by seconds gives metres per second. If the distance is in kilometres and the time is in minutes, convert the minutes to hours first, or the answer will be wrong by a factor of 60.

Worked example: 150 km in 2 hours

Take a drive from one city to another, 150 kilometres door to door, taking 2 hours. Write the two numbers down, then divide: 150 ÷ 2 = 75. The average speed is 75 kilometres per hour. Check it backwards and the maths holds: 75 kilometres per hour for 2 hours covers 75 × 2 = 150 kilometres, which is the distance you started with.

Minutes need converting first

Most short trips are timed in minutes, and minutes are the most common source of errors. A 60-kilometre drive that takes 45 minutes is not 60 ÷ 45, which gives a meaningless 1.33. Convert 45 minutes to hours first: 45 ÷ 60 = 0.75 hours. Then 60 ÷ 0.75 = 80 kilometres per hour. The same rule works for a 25-kilometre ride in 20 minutes: 20 minutes is 0.333 hours, and 25 ÷ 0.333 = 75 kilometres per hour. Deal with the minutes before dividing, or the answer will be wrong.

The common mistake: averaging two speeds

The classic error is to average two speeds by adding them and dividing by two. A car that does 120 kilometres at 60 kilometres per hour and then 120 kilometres at 40 kilometres per hour does not average 50. The first leg takes 120 ÷ 60 = 2 hours and the second takes 120 ÷ 40 = 3 hours, so the whole 240 kilometres takes 5 hours. 240 ÷ 5 = 48 kilometres per hour. The slower leg takes longer, so it drags the average down further than a plain average of the two speeds suggests.

The same answer in three units

One trip gives one speed, but it can be written in three units. 75 kilometres per hour is 75 ÷ 3.6 = 20.83 metres per second, and 75 × 0.621371 = 46.60 miles per hour. The Speed Calculator shows all three at once from the same two inputs. Road signs use kilometres per hour in India and most of Europe, miles per hour in the UK and the US, and school physics problems usually ask for metres per second.

Frequently asked questions

What is the formula for average speed?

Average speed equals total distance divided by total time. A 150-kilometre trip in 2 hours is 150 ÷ 2 = 75 kilometres per hour.

How do I convert minutes to hours?

Divide the minutes by 60. 45 minutes is 45 ÷ 60 = 0.75 hours, so 60 kilometres in 45 minutes is 60 ÷ 0.75 = 80 kilometres per hour.

Why is my average speed lower than the speed I drove at?

Because the average includes slow stretches and stops. Total distance divided by total time counts every minute of the trip.

Can I just average two speeds?

No, unless both parts took the same time. 120 km at 60 km/h plus 120 km at 40 km/h is 240 ÷ 5 = 48 km/h, not 50.

More guides on the Speed Calculator

Try it yourself

Try the Speed Calculator — free, in your browser.

Open the Speed Calculator