← All blog posts

Average Speed: worked example step by step

WhiteUI · A plain-English guide to the Speed Calculator

Worked examples are how a formula turns into a skill, so this guide does one example slowly, with every step shown, and then repeats the same steps on two shorter examples. The trip is a drive of 240 kilometres that takes 3 hours, door to door. The question is simple: what was the average speed? The answer is 80 kilometres per hour.

A diagram showing 240 kilometres divided by 3 hours equals 80 kilometres per hour, with the check 80 times 3 equals 240
240 kilometres in 3 hours is 80 kilometres per hour. The check, 80 × 3 = 240, proves it.

Step 1: write down the distance and the time

Start by writing the two numbers with their units: distance 240 kilometres, time 3 hours. Writing the units down matters, because the units of the answer come from the units of the inputs. Kilometres divided by hours gives kilometres per hour. If the time had been given in minutes, this is the step where it would be converted. The Speed Calculator takes the same two numbers, distance and time, and nothing else.

Step 2: divide distance by time

Apply the formula: average speed = total distance ÷ total time. Put the numbers in: 240 ÷ 3 = 80. The average speed is 80 kilometres per hour. That is the whole calculation. Notice the division is distance first, time second. Dividing the other way, 3 ÷ 240, gives 0.0125, which is not a speed at all.

Step 3: check the answer by working backwards

A good worked example always ends with a check. Multiply the answer by the time: 80 kilometres per hour × 3 hours = 240 kilometres. That matches the distance the trip started with, so the answer is right. This backwards check works for every speed calculation, and it is the fastest way to catch a slip. If the check gives a different distance from the one you started with, redo the division. It also works as a sense check on its own: 80 kilometres per hour is a normal motorway speed, which fits a 240-kilometre drive in 3 hours.

Step 4: the same speed in other units

The same trip can be described in metres per second or miles per hour. Divide by 3.6 for metres per second: 80 ÷ 3.6 = 22.22 metres per second. Multiply by 0.621371 for miles per hour: 80 × 0.621371 = 49.71 miles per hour. These are the same speed, written three ways, and each one suits a different reader.

Two more examples using the same steps

Try the same four steps on a shorter trip. A train covers 180 kilometres in 2.5 hours: 180 ÷ 2.5 = 72 kilometres per hour, and the check is 72 × 2.5 = 180. A morning run covers 10 kilometres in 50 minutes: first convert the time, 50 ÷ 60 = 0.833 hours, then 10 ÷ 0.833 = 12 kilometres per hour, and the check is 12 × 0.833 = 10. Both examples use the same method as the main one.

The common mistake

The usual slip in a worked example is forgetting a stop. If the 240-kilometre drive included a 30-minute lunch break, the total time is 3.5 hours, not 3, and the average speed is 240 ÷ 3.5 = 68.57 kilometres per hour. Average speed counts the whole time from leaving to arriving, including every stop. Leaving a stop out makes the speed look faster than it really was. When a problem says “including stops” or gives a total elapsed time, use that total, not just the moving time.

Frequently asked questions

What is 240 km in 3 hours in km/h?

240 ÷ 3 = 80 kilometres per hour. Check it: 80 × 3 = 240 kilometres.

How do I check my speed calculation?

Multiply the answer by the time. If the result equals the distance you started with, the calculation is right.

What is 80 km/h in m/s and mph?

80 ÷ 3.6 = 22.22 m/s, and 80 × 0.621371 = 49.71 mph. It is the same speed in three units.

Do stops count in the time?

Yes. Average speed uses total time from start to finish, including stops. A 30-minute stop on a 3-hour drive makes the time 3.5 hours.

More guides on the Speed Calculator

Try it yourself

Try the Speed Calculator — free, in your browser.

Open the Speed Calculator