← All blog posts

Common mistakes when calculating average speed

WhiteUI · A plain-English guide to the Speed Calculator

Speed calculations are short, which makes them feel safe, but five errors show up again and again, in homework, in driving estimates and in exam answers. Each one is easy to make and easy to miss, because the wrong answer often looks plausible. This guide works through all five, showing the wrong answer next to the right one, with the exact numbers.

A diagram showing that 120 kilometres at 60 and 120 kilometres at 40 average to 48 kilometres per hour, not 50
120 km at 60 km/h plus 120 km at 40 km/h averages 48 km/h, not 50. The slower leg takes longer, so it weighs more.

Mistake 1: averaging two speeds

The most famous error is adding two speeds and dividing by two. A car does 120 kilometres at 60 kilometres per hour, then 120 kilometres at 40 kilometres per hour. The plain average of 60 and 40 is 50, but the real average speed is 48. The first leg takes 120 ÷ 60 = 2 hours and the second takes 120 ÷ 40 = 3 hours, so the whole 240 kilometres takes 5 hours, and 240 ÷ 5 = 48.

Mistake 2: using minutes as if they were hours

The second error is dividing kilometres by minutes without converting. A 60-kilometre drive in 45 minutes is not 60 ÷ 45 = 1.33. Convert the minutes first: 45 ÷ 60 = 0.75 hours, then 60 ÷ 0.75 = 80 kilometres per hour. If an answer comes out as a small decimal for a car or a cycle, the minutes were probably never converted. Writing the units next to every number makes this error visible at once.

Mistake 3: forgetting the stops

Average speed counts the whole time, stops included. A 200-kilometre trip that takes 2 hours 40 minutes of driving plus a 20-minute fuel stop has a total time of 3 hours, so the average speed is 200 ÷ 3 = 66.67 kilometres per hour. Counting only the driving time gives 200 ÷ 2.667 = 75 kilometres per hour, which describes the moving speed, not the average speed of the trip.

Mistake 4: dividing the wrong way round

Dividing time by distance gives a number that looks like an answer but is not a speed. For 150 kilometres in 2 hours, the wrong way gives 2 ÷ 150 = 0.0133. A quick sense check catches it: a car’s speed in kilometres per hour should be in the tens, and a walking speed should be around 5. If the answer is a tiny decimal, swap the numbers.

Mistake 5: mixing units in one calculation

The last error is mixing units: kilometres with minutes, metres with hours, or miles with kilometres. A 100-metre sprint in 9.58 seconds is 100 ÷ 9.58 = 10.44 metres per second, and 10.44 × 3.6 = 37.58 kilometres per hour. A 60-mile trip is 60 × 1.60934 = 96.56 kilometres, so enter it as 96.56 kilometres, not 60, when the answer should be in kilometres per hour.

A two-second check that catches all five

Multiply the answer by the time. If the result is the distance you started with, the calculation is right; if it is not, one of the five errors has crept in. For the two-leg car trip, 48 × 5 = 240 kilometres, which matches. For the 45-minute drive, 80 × 0.75 = 60 kilometres, which matches. This backwards check takes two seconds and works on every speed problem — and the Speed Calculator gives the same answers, so you can confirm any of them there.

Frequently asked questions

Why is averaging two speeds wrong?

Because the slower leg takes longer. 120 km at 60 km/h (2 h) plus 120 km at 40 km/h (3 h) is 240 ÷ 5 = 48 km/h, not 50.

What happens if I use minutes instead of hours?

The answer comes out 60 times too small. 60 km in 45 minutes is 80 km/h, not 1.33.

Do stops count in average speed?

Yes. A 200 km trip in 3 hours including a stop is 200 ÷ 3 = 66.67 km/h.

How can I check my answer quickly?

Multiply the speed by the time. If the result equals the distance, it is right: 48 × 5 = 240 km.

More guides on the Speed Calculator

Try it yourself

Try the Speed Calculator — free, in your browser.

Open the Speed Calculator