The complete guide to Power
This guide covers power from start to finish: what it means, the formula, a worked example, the common mistakes and the everyday uses.
The formula is: Power = work ÷ time, with work in joules and time in seconds, giving watts. For an electrical circuit the same quantity is power = voltage × current, with voltage in volts and current in amps, also giving watts.
Worked example: Doing 1,000 joules of work in 10 seconds needs 1,000 ÷ 10 = 100 watts. The same 100 watts could come from a circuit at 20 volts and 5 amps, since 20 × 5 = 100.
A second example: 2,400 joules in 20 seconds is 2,400 ÷ 20 = 120 watts. Electrically, 12 volts × 5 amps = 60 watts, and 230 volts × 2 amps = 460 watts.
A mistake to avoid — using minutes instead of seconds for time. Power needs time in seconds. 1,000 joules in 2 minutes is 1,000 ÷ 120 = 8.33 watts, not 1,000 ÷ 2 = 500. Convert minutes to seconds first.
A mistake to avoid — confusing power with energy. Power is the rate; energy is the total. A 100-watt device running for 10 seconds uses 1,000 joules, but a 100-watt rating alone says nothing about total energy without a time.
Read the everyday examples and the tips guides next for more situations, and use the calculator whenever a new set of numbers comes up.
Power or energy: which number should you compare?
Power and energy answer different questions, and mixing them up is the most common confusion in this subject. Power, in watts, is how fast energy is used. Energy, in watt-hours or joules, is how much is used in total. A 1,500-watt room heater running for 2 hours uses 1,500 × 2 = 3,000 watt-hours, or 3 units of electricity. A 100-watt bulb running for 10 hours uses 100 × 10 = 1,000 watt-hours, or 1 unit. The heater’s power is fifteen times the bulb’s, but over those hours it uses only three times the energy — because the bulb ran five times as long.
So compare power when you want to know how strong a device is, or whether a circuit can carry it: a 1,500-watt heater needs a circuit that can carry it, a 100-watt bulb does not. Compare energy — power multiplied by time — when you want to know what it will cost to run, or how long a battery will last. An electricity bill charges for energy, in units, not for power. If two appliances have the same wattage, the one that runs longer costs more; if they run for the same time, the higher-wattage one costs more.
What to check before you trust a power answer
First, check the time is in seconds for the work ÷ time formula — 5,000 joules in 25 seconds is 5,000 ÷ 25 = 200 watts, and the same 200 watts comes from 40 volts × 5 amps, so the two formulas agree. If they disagree for the same situation, one input is wrong. Second, check you have not swapped power and energy: a figure in joules or watt-hours is energy, not power, and a figure in watts is power, not energy.
Third, check the size against things you know: a phone charger is a few watts, a ceiling fan about 70 watts, an iron or a geyser over 1,000. A fan at 7,000 watts or a geyser at 7 watts should stop you at once. And check the voltage you used: Indian mains supply is 230 volts, so a device drawing 2 amps from it uses 230 × 2 = 460 watts — a useful anchor to test any electrical answer against.
Frequently asked questions
Where do I start?
Start with the formula and the worked example, then try your own numbers in the calculator.
What should I read next?
The tips guide for habits, the mistakes guide for slips to avoid, and the case study for a full scenario worked through.
Do I need to create an account to use the calculator?
No. Everything runs in your browser, nothing is sent anywhere, and there is no sign-up.
More guides on the Power Calculator
Enter work and time, or voltage and current, to see power in watts.