Power common mistakes to avoid
Most wrong answers come from a small set of slips, not from hard maths. Here are the ones to watch for, with the correction for each.
Using minutes instead of seconds for time. Power needs time in seconds. 1,000 joules in 2 minutes is 1,000 ÷ 120 = 8.33 watts, not 1,000 ÷ 2 = 500. Convert minutes to seconds first.
Confusing power with energy. Power is the rate; energy is the total. A 100-watt device running for 10 seconds uses 1,000 joules, but a 100-watt rating alone says nothing about total energy without a time.
Mixing the two formulas’ units. Work ÷ time needs joules and seconds; voltage × current needs volts and amps. Feeding volts into the work formula, or joules into the electrical one, gives a number with no meaning.
Worked example to test yourself against: Doing 1,000 joules of work in 10 seconds needs 1,000 ÷ 10 = 100 watts. The same 100 watts could come from a circuit at 20 volts and 5 amps, since 20 × 5 = 100. A second example: 2,400 joules in 20 seconds is 2,400 ÷ 20 = 120 watts. Electrically, 12 volts × 5 amps = 60 watts, and 230 volts × 2 amps = 460 watts. If your calculator gives a different answer for those inputs, one of the slips above is almost certainly the cause.
Frequently asked questions
What is the single most common mistake?
Entering a number in the wrong unit, or dividing the wrong way round. Convert to the base unit first, every time.
How do I catch a mistake before it matters?
Sanity-check the answer: does it sit in a plausible range, and does changing one input move it in the direction you expect?
What if my result looks wrong?
Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.
More guides on the Power Calculator
Enter work and time, or voltage and current, to see power in watts.