← All blog posts

Power cheat sheet

WhiteUI · A plain-English guide to power calculator

This is the whole subject on one page: the formula, the units, the typical values and the slips to avoid. Keep it beside you while you practise.

The formula is: Power = work ÷ time, with work in joules and time in seconds, giving watts. For an electrical circuit the same quantity is power = voltage × current, with voltage in volts and current in amps, also giving watts.

Worked example: Doing 1,000 joules of work in 10 seconds needs 1,000 ÷ 10 = 100 watts. The same 100 watts could come from a circuit at 20 volts and 5 amps, since 20 × 5 = 100.

A second example: 2,400 joules in 20 seconds is 2,400 ÷ 20 = 120 watts. Electrically, 12 volts × 5 amps = 60 watts, and 230 volts × 2 amps = 460 watts.

The table below it is the quick-lookup version of the same formula. Use it to sanity-check a result, then confirm the exact figure in the calculator.

Quick reference

Keep this table beside you while you practise — every row uses the same formula as the calculator.

Work and time, or voltage and currentPower
1,000 J in 10 s100 W
2,400 J in 20 s120 W
12 V × 5 A60 W
230 V × 2 A460 W
3,600 J in 60 s60 W

Work ÷ time or volts × amps: which formula do you need?

Both formulas give watts, but they answer different questions. Work ÷ time is for a job done over time: lifting, pushing, running a machine. Volts × amps is for a circuit: a bulb, a charger, a heater plugged into the wall. Pick the one whose inputs you actually have — if you know the work and the time, use the first; if you know the voltage and the current, use the second. Do not convert between them unless you have to.

The two routes can meet on the same answer, which is a good way to check your understanding. Doing 6,900 joules of work in 10 seconds needs 6,900 ÷ 10 = 690 watts. A circuit at 230 volts carrying 3 amps also gives 230 × 3 = 690 watts. Same power, different situation: one is a machine doing a job, the other is a current flowing through a wire. In an Indian home, the volts × amps form is the one you will use most — a 230-volt supply is standard — while work ÷ time is the one for physics problems about lifting and moving things.

What to check before you trust a power figure

First, check the time is in seconds. Minutes are the usual slip: 1,800 joules in 15 seconds is 1,800 ÷ 15 = 120 watts, and the same 120 watts comes from 24 volts × 5 amps — two routes to one answer, which is how you know both are right. If you had used 15 minutes instead of 15 seconds, the answer would have been 2 watts, which should have looked wrong at once.

Second, check the units on the electrical side: volts times amps gives watts, but milliamps are not amps — 500 milliamps is 0.5 amps, and forgetting that makes the answer a thousand times too big. Third, sanity-check the size: a phone charger is a few watts, a ceiling fan is around 70 watts, a mixer-grinder a few hundred. If your answer says a fan uses 7,000 watts, a unit is wrong somewhere.

Frequently asked questions

How do I use the cheat sheet?

Find the row closest to your own numbers, then use the calculator for the exact figure. The sheet is a shortcut, not a replacement.

Why are the sheet values rounded?

So they are easy to scan. The calculator keeps full precision and rounds only for display.

What if my result looks wrong?

Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.

More guides on the Power Calculator

Try it yourself

Enter work and time, or voltage and current, to see power in watts.

Open the Power Calculator