How to use the Area Calculator — step by step
The Area Calculator works out the area of a rectangle, a circle or a triangle. Pick your shape, enter the measurements, and read the answer in square metres. Nothing is stored and nothing leaves your browser.
The three steps
- Step 1 — Pick a shape. Use the three buttons at the bottom of the left panel: Rectangle, Circle or Triangle. Only the boxes for the shape you picked are shown.
- Step 2 — Enter the measurements. Type the numbers in the boxes or drag the sliders. A rectangle starts at 12 m long and 8 m wide, a circle at a radius of 5 m, and a triangle at a base of 10 m and a height of 6 m.
- Step 3 — Read the answer. The big number on the right is the area, in square metres. Underneath it you get the same area in square feet, and a small preview of your shape drawn to scale.
Change any number and the answer updates at once, so you can try a few sizes before you commit to one.
Worked example
A rug is 5 m long and 4 m wide. Pick Rectangle, enter 5 for the length and 4 for the width, and the calculator shows 5 × 4 = 20 m². A round table has a radius of 3 m: pick Circle, enter 3, and the answer is π × 3² = 3.1416 × 9 = 28.27 m².
Rectangle: 5 × 4 = 20 m² Circle: π × 3² = 28.27 m²
At a glance
A rectangle 5 m long and 4 m wide covers 20 m² — five metres times four metres.
The mistake to avoid
Entering the diameter of a circle where the radius belongs. The diameter is the full width across a circle; the radius is half of that. If your round rug is 6 m across, the radius is 3 m — enter 6 and the calculator gives π × 6² = 113.10 m², four times the true 28.27 m². Halve the width across first, then enter it.
Calculator, tile count, or the builder’s plan — which to use?
There are three ways to get the area of a room, and each suits a different job. The calculator is quickest when you have your own measurements and want the answer in square metres and square feet at once. Counting tiles suits a room that is already tiled: count the full tiles across and down, multiply, and you have the area without a tape measure. The builder’s plan suits a flat you have not moved into yet — but treat its numbers as approximate, since plans are often rounded or measured to the outside of the walls.
A tile count is easy to check against the calculator. A bedroom 3.6 m by 3 m is 10.8 m², which is 116.25 ft². With 1 ft by 1 ft tiles, each tile is 1 ft², so the floor should hold about 117 tiles, allowing for the cut pieces at the edges. If you count far fewer or far more, either the tiles are not a foot square or the room is not the size you think — measure it and run the calculator.
For anything you will pay for — flooring, paint, a false ceiling — use the calculator with measurements you took yourself. Tile counts and plans are useful checks, but neither one replaces a tape measure.
What to check before you trust the answer
Three quick checks catch most bad answers. First, look at the shape button: if Circle is still selected from an earlier sum, the tool will use only the radius box and ignore the length and width you typed, so make sure the button matches the shape on your floor. Second, check that the slider and the typed number agree — drag a slider by accident and the box updates with it, so a number you typed earlier may no longer be the one the tool is using.
Third, look at the preview. A gable with a base of 8 m and a height of 3 m should give ½ × 8 × 3 = 12 m², and the preview should show a low, wide triangle. If the preview looks nothing like your shape, or the answer is far from a rough guess — a bedroom is usually 10 to 20 m² — re-measure the longest wall and try again. An answer that surprises you is usually an input that slipped, not a fault in the maths.
Frequently asked questions
Which shape should I pick first?
The shape of the floor, garden or patch you are measuring. A room is a rectangle, a round table is a circle, and a gable end is a triangle.
What unit does the answer come in?
Square metres by default, with the same area in square feet underneath. The boxes expect metres, so measure in metres.
Can I use feet instead of metres?
Enter metres. If you measured in feet, divide by 3.281 to get metres first — 10 feet is about 3.05 metres.
Does the calculator save my measurements?
No. Everything runs in your browser and nothing is sent anywhere.
More guides on the Area Calculator
- Area Calculator explained with worked examples
- Area Calculator formula — how it actually works
- Area Calculator for beginners — start here
- Common mistakes people make with the Area Calculator
- Area Calculator vs doing it by hand — which is faster?
- area calculator — the complete guide
- How to get an accurate result from the Area Calculator
- Area Calculator for students — with examples
- Area Calculator for homeowners and DIYers
A free calculator for the area of a rectangle, circle or triangle, with a scaled preview of your shape.