← All blog posts

Area Calculator for students — with examples

WhiteUI · A plain-English guide to the Area Calculator

If area has shown up in your homework, the Area Calculator is a quick way to check your answers — but show your working too, because the working is what earns the marks. Here are the three formulas with examples you can follow line by line.

Rectangle: length × width

A rectangle 8 m long and 5 m wide is 8 × 5 = 40 m². A square is a rectangle with equal sides, so a 7 m square is 7 × 7 = 49 m².

Circle: π × radius²

Square the radius first, then multiply by π (3.1416). A circle with a radius of 3 m is π × 3² = 3.1416 × 9 = 28.27 m². Remember: radius squared means radius times radius — 3² is 9, not 6.

Triangle: ½ × base × height

Multiply the base by the height, then halve it. A triangle with a base of 6 m and a height of 4 m is ½ × 6 × 4 = 12 m².

Rectangle: 8 × 5 = 40 m²
Circle: π × 3² = 28.27 m²
Triangle: ½ × 6 × 4 = 12 m²
Square: 7 × 7 = 49 m²

At a glance

height 4 mbase 6 m12 m²The dashed line is the height, not the sloping side.

The height is the dashed vertical line from the base to the top corner — 4 m — so the area is ½ × 6 × 4 = 12 m².

The mistake to avoid

Forgetting the ½ in the triangle formula. A triangle is half of the rectangle with the same base and height, so 6 × 4 = 24 m² is the rectangle — the triangle is 12 m². If your triangle answer looks twice as big as you expect, check whether you halved it.

Calculator or by hand — when each one helps

Use both, for different jobs. Working by hand is how you learn the formula: you choose the shape, pick the right numbers and do the multiplication yourself. The calculator is how you check the answer. Do the sum on paper first, then type the same numbers into the calculator. If the two answers match, your working is right. If they do not, the mistake is almost always in the numbers you typed — a radius where the diameter belonged, or a centimetre figure used as metres — not in the formula.

Try it with a fresh example. A rectangle 9 m long and 4 m wide is 9 × 4 = 36 m² by hand; the calculator should say the same. A circle with a radius of 4 m is π × 4² = 3.1416 × 16 = 50.27 m². And a triangle with a base of 10 m and a height of 7 m is ½ × 10 × 7 = 35 m². Three shapes, three checks, and each one takes less than a minute. That is the habit that pays off in a test: work it out, then verify it, and trust the answer only when both agree.

The mistake to check for: centimetres mixed with metres

The formula does not care what unit you use, as long as both measurements use the same one. A desk top 250 cm long and 180 cm wide is 2.5 m by 1.8 m, so its area is 2.5 × 1.8 = 4.5 m². Multiply the raw numbers instead — 250 × 180 = 45,000 — and call the answer square metres, and you are 10,000 times out, because 1 m² is 10,000 cm². The number 45,000 is not wrong; it is 45,000 cm², which is the same 4.5 m².

The fix is one step before you start: convert every measurement to the same unit. Centimetres to metres means dividing by 100, so 250 cm becomes 2.5 m and 180 cm becomes 1.8 m. Do that first, then multiply. In a test, writing “250 cm = 2.5 m” as your first line shows the examiner you checked — and it is the line that saves the marks when the numbers get longer.

Frequently asked questions

What is 3² in the circle formula?

3 × 3 = 9. Squaring means multiplying a number by itself, so π × 3² is 3.1416 × 9 = 28.27 m².

Do I use the diameter or the radius?

The radius — half the width across. A circle 6 m across has a radius of 3 m.

Why is the triangle formula halved?

A triangle fills exactly half of the rectangle with the same base and height, so you multiply base by height and halve the result.

Should I write the units in my answer?

Yes — always. An area without m² is just a number, and in a test it loses the mark. The answer to 8 × 5 is 40 m², not 40.

More guides on the Area Calculator

Try it yourself

A free calculator for the area of a rectangle, circle or triangle, with a scaled preview of your shape.

Open the Area Calculator