Area Calculator for homeowners and DIYers
Before you buy flooring, paint or turf, you need one number: the area. The Area Calculator gives it from your measurements, and this guide turns it into an order quantity.
Flooring: measure, then add 10% spare
A room 5.5 m long and 4 m wide is 5.5 × 4 = 22 m². Never order exactly 22 m² — cuts, offcuts and one bad board eat into it. Add 10% for waste: 22 × 1.10 = 24.2 m² to buy. If the room is L-shaped, split it into two rectangles, work out each part and add them.
Paint: one wall at a time
Paint covers a wall, and a wall is a rectangle. A wall 4 m wide and 2.5 m high is 4 × 2.5 = 10 m². A litre of paint typically covers about 10 m² per coat, so that wall needs about a litre per coat — check your tin, because coverage varies, and double it for two coats.
Lawns and round beds: use the circle
A round lawn with a radius of 7 m is π × 7² = 3.1416 × 49 = 153.94 m². Turf and seed are sold by the square metre, so that number is your order quantity — again, add about 10% spare for trimming the edges.
Flooring: 5.5 × 4 = 22 m², buy 24.2 m² Paint: 4 × 2.5 = 10 m² per wall Lawn: π × 7² = 153.94 m²
At a glance
A 5.5 m by 4 m room is 22 m² of flooring. Buy 24.2 m² so cuts and offcuts are covered.
The mistake to avoid
Ordering exactly the area and nothing more. Every real job wastes material — boards get cut, paint goes on thicker at the edges, turf trims do not fit anywhere. The 10% allowance on 22 m² is only 2.2 m² extra, and it is far cheaper than a second trip to the shop for one more pack.
Calculator or by hand — where each one earns its keep
The calculator does not replace the tape measure — you still have to walk the room and measure it yourself. What it replaces is the arithmetic, and the arithmetic is where a job quietly goes wrong. Converting square metres to square feet, dividing a floor area by the size of one tile, adding the spare allowance: each step is easy on its own, and each one is a chance to slip a decimal or forget a step. The calculator does all of them in one pass, from the measurements you typed in.
Take floor tiles. The room in this guide is 22 m², which is 22 × 10.764 = 236.81 ft². A 2 ft by 2 ft tile covers 4 ft², so 236.81 ÷ 4 = 59.2 — call it 60 tiles. With the 10% spare, you are buying for 24.2 m², which is 260.49 ft², so 260.49 ÷ 4 = 65.12 — call it 66 tiles. Done by hand, most people round 22 m² to “about 240 ft²” and order 60 tiles, then find themselves short by half a dozen. The tape measure gives you the truth; the calculator keeps it intact.
The same goes for the bill. At ₹180 per m², the measured 22 m² costs 22 × 180 = ₹3,960, while the 24.2 m² you actually buy costs 24.2 × 180 = ₹4,356. The ₹396 gap is the spare material, not a mistake — but if you had guessed the room at 20 m², you would have budgeted ₹3,600 and been short on both tiles and money.
The mistake to check for: painting the door as well as the wall
The wall in this guide is 4 m by 2.5 m, which is 10 m² — but only if the whole wall is wall. A standard door, 0.9 m wide and 2.1 m high, covers 0.9 × 2.1 = 1.89 m² of it, so the paintable area is 10 − 1.89 = 8.11 m². Over two coats that is 3.78 m² of paint bought for a door you were never going to paint. The same applies to windows: measure each opening as its own small rectangle and subtract it before you work out how much paint to buy.
The fix takes a minute. List every opening on the wall, work out each one, and subtract the total from the wall’s area before you open the calculator. Two doors (2 × 1.89 = 3.78 m²) and a window 1.5 m by 1.2 m (1.8 m²) take 5.58 m² off the wall between them — and at a litre per 10 m² per coat, that is over half a litre a coat you do not need to buy.
Frequently asked questions
How much extra flooring should I buy?
About 10% over the measured area. A 22 m² room needs 24.2 m² of flooring to cover cuts and offcuts.
How do I work out paint for a room?
Work out each wall as a rectangle — width × height — and add them. A 4 m by 2.5 m wall is 10 m², about a litre per coat.
My room is L-shaped. What do I do?
Split it into two rectangles, work out each area, and add them. The tool handles one rectangle at a time.
How do I measure a round lawn?
Measure the width across and halve it to get the radius, then use the circle: π × radius². A radius of 7 m gives 153.94 m².
More guides on the Area Calculator
- How to use the Area Calculator — step by step
- Area Calculator explained with worked examples
- Area Calculator formula — how it actually works
- Area Calculator for beginners — start here
- Common mistakes people make with the Area Calculator
- Area Calculator vs doing it by hand — which is faster?
- area calculator — the complete guide
- How to get an accurate result from the Area Calculator
- Area Calculator for students — with examples
A free calculator for the area of a rectangle, circle or triangle, with a scaled preview of your shape.