← All blog posts

Body Fat Calculator formula — how it actually works

WhiteUI · A plain-English guide to the Body Fat Calculator

The Navy formula looks strange at first sight — logarithms, and the numbers 495 and 450 that seem to come from nowhere. Each part does a job, though, and this post takes it apart piece by piece, then runs a man’s measurements through it so you can check every step. Try the same numbers in the Body Fat Calculator and check that the answer matches.

The formulas

Men: % = 495 ÷ (1.0324 − 0.19077 × log10(waist − neck) + 0.15456 × log10(height)) − 450
Women: % = 495 ÷ (1.29579 − 0.35004 × log10(waist + hip − neck) + 0.22100 × log10(height)) − 450
All measurements in centimetres

Reading the formula, piece by piece

  • Waist − neck (men). The waist carries the fat signal; the neck is mostly muscle and bone, so subtracting it leaves the part of the waist that tracks fat. For our example, 85 − 38 = 47 cm.
  • Waist + hip − neck (women). Women carry fat at the waist and the hips, so the women’s formula adds the hip in. For our example, 85 + 95 − 38 = 142 cm.
  • log10. Body measurements do not grow in a straight line with body fat, so the formula takes the logarithm (base 10) of the measurement. log10(47) is 1.6721 and log10(175) is 2.2430. A scientific calculator, or the log button on a phone calculator, gives these.
  • The constants. 1.0324, 0.19077 and 0.15456 were fitted from measurements of Navy personnel, so that the formula’s answers lined up with lab tests. They are not magic numbers — they are the best fit the researchers found.
  • 495 ÷ … − 450. The last step turns the result into a percentage. It comes from the density formula the method is built on: body density is turned into a fat percentage, and 495 and 450 are the numbers that do that conversion.

Worked example — a man

Height 175 cm, waist 85 cm, neck 38 cm. Waist minus neck is 47 cm. log10(47) is 1.6721, and 0.19077 × 1.6721 is 0.31899. log10(175) is 2.2430, and 0.15456 × 2.2430 is 0.34668. The denominator is 1.0324 − 0.31899 + 0.34668 = 1.0601. Then 495 ÷ 1.0601 = 466.94, and 466.94 − 450 = 16.94%.

Men: % = 495 ÷ (1.0324 − 0.19077 × log10(47) + 0.15456 × log10(175)) − 450
     = 495 ÷ (1.0324 − 0.31899 + 0.34668) − 450
     = 495 ÷ 1.0601 − 450
     = 466.94 − 450 = 16.94%

Worked example — a woman

Same height, waist and neck, plus a 95 cm hip. Waist plus hip minus neck is 142 cm. log10(142) is 2.15229, and 0.35004 × 2.15229 is 0.75339. log10(175) is 2.2430, and 0.22100 × 2.2430 is 0.49571. The denominator is 1.29579 − 0.75339 + 0.49571 = 1.03811. Then 495 ÷ 1.03811 = 476.83, and 476.83 − 450 = 26.83%.

Women: % = 495 ÷ (1.29579 − 0.35004 × log10(142) + 0.22100 × log10(175)) − 450
       = 495 ÷ (1.29579 − 0.75339 + 0.49571) − 450
       = 495 ÷ 1.03811 − 450
       = 476.83 − 450 = 26.83%

At a glance

Two worked examples, one scale0%50%Man 16.94%Woman 26.83%

Both people are 175 cm tall with an 85 cm waist and a 38 cm neck; the woman also has a 95 cm hip. The same formula shape, with different constants, gives two different answers.

The mistake to avoid

Using the natural log (ln) instead of log10. The two are different functions, and swapping them gives a nonsense answer — usually a negative percentage. The formula needs log base 10, marked “log” on most calculators. The other slip is forgetting to subtract the neck: using the full 85 cm waist instead of 47 cm pushes the answer far too high.

This calculator gives an estimate for information only. It is not medical advice and it does not diagnose anything. If you have a health concern, talk to a doctor or another qualified health professional.

Navy formula vs a BMI formula — different tools, different answers

The Navy formula and the BMI formula look alike on the page — both take height and weight-ish inputs and return one number — but they measure different things. BMI uses weight and height only, so two people with the same height and weight get the same BMI even if one is muscular and the other is not. The Navy formula uses circumferences, so it can separate the two: a bigger waist at the same height means more fat, whatever the weight says.

Take a woman 158 cm tall, waist 78 cm, hip 100 cm, neck 32 cm. Waist plus hip minus neck is 146 cm, and the women’s Navy formula gives 33.36% body fat. At 64 kg, that is 64 × 33.36% = 21.4 kg of fat. The same woman’s BMI would be 64 ÷ (1.58 × 1.58) = 25.6 — just inside the “overweight” band — while the tape result says about a third of her weight is fat. Neither number is wrong; they are answers to different questions, and quoting one as if it were the other is where the confusion starts.

What to check before you quote the formula

Check the units first. The formula expects centimetres. Inches work only if you convert them first — 1 inch is 2.54 cm — and mixing the two inside one calculation gives nonsense. The same applies to the women’s formula: the hip measurement is part of the sum, not an optional extra.

Check which formula you are reading. The men’s version subtracts the neck from the waist; the women’s version adds the hip and then subtracts the neck. They share the same shape — 495 divided by a bracket, minus 450 — but the numbers inside the bracket are different, and the two answers for the same measurements are never comparable.

Check the rounding last. The formula gives a long decimal; two decimal places is plenty. Rounding halfway through — after the logarithm, say — shifts the final answer by a few tenths, which is small but avoidable. Keep full precision until the last step.

Frequently asked questions

Why does the formula use log10?

Body fat does not rise in a straight line with waist size, so the formula takes the base-10 logarithm of the measurements to straighten the relationship out. It is the same idea as a log scale on a chart.

Where do 495 and 450 come from?

They convert body density into a fat percentage. The Navy method estimates density from the tape measurements, and 495 and 450 are the numbers that turn that density into a percentage.

Why do men and women have different formulas?

Because fat is distributed differently: the waist alone tracks it well for men, while women need the hip as well. The two formulas were fitted separately, so each uses its own constants.

Can I use inches instead of centimetres?

Not in this calculator — it takes centimetres, so type all measurements in cm. The formula’s constants belong to the unit you feed it, so mixing units gives a wrong answer.

More guides on the Body Fat Calculator

Try it yourself

A free calculator that estimates body fat percentage from height and tape measurements, using the US Navy method. An estimate, not a medical test.

Open the Body Fat Calculator