Body Fat Calculator for students — with examples
Body fat percentage sounds like a health word, but the maths behind it is school maths: logarithms, subtraction and division. If you have met log10, you already know the hardest part — and the Body Fat Calculator does the arithmetic for you.
What the percentage means, in one paragraph
Suppose a man weighs 85 kg and his body fat is 18.98%. That means 85 × 18.98% = 16.13 kg of his weight is fat, and the other 68.87 kg is muscle, bone, water and organs. The percentage is the fat part divided by the whole, times 100. The calculator estimates that percentage from tape measurements instead of weighing the fat directly, which no one can do at home.
Worked example
A man 172 cm tall, with a 90 cm waist and a 41 cm neck. Waist minus neck is 49 cm. log10(49) is 1.6902, and 0.19077 × 1.6902 is 0.32244. log10(172) is 2.2355, and 0.15456 × 2.2355 is 0.34552. The denominator is 1.0324 − 0.32244 + 0.34552 = 1.05548. Then 495 ÷ 1.05548 = 468.98, and 468.98 − 450 = 18.98%.
Man: height 172 cm, waist 90 cm, neck 41 cm Waist − neck = 90 − 41 = 49 cm % = 495 ÷ (1.0324 − 0.19077 × log10(49) + 0.15456 × log10(172)) − 450 = 495 ÷ 1.05548 − 450 = 468.98 − 450 = 18.98%
At a glance
Two worked examples on the same scale. The 90 cm waist at 172 cm gives 18.98%; an 82 cm waist at 180 cm gives 13.72%.
Try it yourself
Take a man 180 cm tall, with an 82 cm waist and a 38 cm neck. Waist minus neck is 44 cm. Work it out in the calculator: the answer is 13.72% body fat. The waist is 8 cm smaller and the height is 8 cm taller than the first example, and the percentage drops by more than 5 points — that is how much the two measurements matter.
The mistake to avoid
Using the natural log (ln) instead of log10. On a calculator the two buttons sit side by side, and they give different answers: ln(49) is 3.8918 while log10(49) is 1.6902. The Navy formula needs log base 10. If your hand-worked answer comes out negative, or above 60%, check which log button you pressed first.
This calculator gives an estimate for information only. It is not medical advice and it does not diagnose anything. If you have a health concern, talk to a doctor or another qualified health professional.
Body fat percentage vs BMI — which one answers your question
BMI and body fat percentage answer different questions, and mixing them up is the most common confusion in this area. BMI divides your weight by your height squared. It is a screening number: quick, standard, and used by clinics because it needs only two inputs. But it cannot tell muscle from fat, so a student who lifts weights can land in the “overweight” band on BMI while carrying little fat.
Body fat percentage asks the narrower question — how much of your weight is fat — and answers it from tape measurements. Take a man 165 cm tall, waist 76 cm, neck 36 cm. Waist minus neck is 40 cm, and the Navy formula gives 12.83% body fat. At 75 kg, that is 75 × 12.83% = 9.6 kg of fat. If your question is “am I carrying too much fat?”, use the body fat number; if your question is “what does the standard chart say about my weight?”, use BMI.
What to check in your own calculation
Check the order of operations first. The men’s formula needs waist minus neck before anything else, and the logarithm applies to that difference, not to the waist on its own. Working out log10(76) instead of log10(40) is the single easiest way to get a wild answer.
Check the log button next. The formula uses log base 10, not the natural log. On most phone calculators the base-10 button is labelled “log” and the natural log is “ln”; pressing the wrong one gives a number that looks plausible but is wrong by several percentage points.
Check the sign of the answer last. A negative percentage, or anything above 60%, means a step went wrong — usually the waist and neck were swapped, or the hip was left out of the women’s formula. A correct answer for most adults lands between 10% and 35%.
Frequently asked questions
Is the Navy formula part of school maths?
The pieces are. Logarithms, substitution and rearranging a formula are all school topics — the formula just puts them together in one real-world calculation.
What is log10, in plain words?
log10 of a number is the power you raise 10 to in order to get that number. log10(100) is 2, because 10² = 100, and log10(49) is 1.6902, because 10^1.6902 ≈ 49.
Do I need a scientific calculator?
By hand, yes — you need a log button. Or use the calculator on this site: four boxes, and the answer appears at once.
Why does the formula use the neck at all?
The neck is mostly muscle and bone, so subtracting it from the waist leaves the part of the waist measurement that tracks fat. It is a rough correction, but it makes the estimate much better.
More guides on the Body Fat Calculator
- How to use the Body Fat Calculator — step by step
- Body Fat Calculator explained with worked examples
- Body Fat Calculator formula — how it actually works
- Body Fat Calculator for beginners — start here
- Common mistakes people make with the Body Fat Calculator
- Body Fat Calculator vs doing it by hand — which is faster?
- body fat calculator — the complete guide
- How to get an accurate result from the Body Fat Calculator
- Body Fat Calculator for homeowners and DIYers
A free calculator that estimates body fat percentage from height and tape measurements, using the US Navy method. An estimate, not a medical test.