← All tools/Calculators/Geometry/Cone Surface Area Calculator

Cone Surface Area Calculator

A cone’s surface is a curved side plus a circular base. Enter the radius and height and get both areas and the slant height.

cm
cm

Total surface area

75.40 cm²

Total surface area · slant height 5 cm

Curved side 62.5%Base 37.5%
Lateral (curved) area47.12 cm²
Base area28.27 cm²
Slant height5 cm

How it works

Slant height l = √(r² + h²)
Lateral (curved) area = π × r × l
Total surface area = π × r × (r + l)
Base area = π × r²

Radius 3 cm, height 4 cm: slant height l = √(3² + 4²) = √25 = 5 cm. Lateral area = π × 3 × 5 = 15π = 47.12 cm². Total area = π × 3 × (3 + 5) = 24π = 75.40 cm². Base area = π × 3² = 9π = 28.27 cm².

Frequently asked questions

What is the slant height of a cone?

It is the distance from the tip of the cone to any point on the edge of the base, measured along the curved surface. By Pythagoras, l = √(r² + h²) — for a 3-4-5 cone, that is exactly 5.

What is the difference between lateral and total surface area?

Lateral area is only the curved side (πrl). Total area adds the circular base (πr²), so total = πr(r + l). If the cone is open at the bottom, like a funnel, you only need the lateral area.

Does this work for an oblique cone?

No. This tool assumes a right circular cone, where the tip sits directly above the centre of the base. A leaning (oblique) cone needs a different formula.

Why is the total area more than the lateral area?

Because the total includes the base circle as well. For the worked example, the curved side is 47.12 cm² and the base adds 28.27 cm², giving 75.40 cm² in total.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.