← All tools/Calculators/Geometry/Cylinder Surface Area Calculator

Cylinder Surface Area Calculator

Total surface area and volume of a cylinder from radius and height.

Total surface area

—

Surface area
Volume

How it works

Total surface area A = 2 × π × r × (r + h)
Volume V = π × r² × h

Total surface area is the two circular ends plus the curved side, combined into one formula: A = 2 × π × r × (r + h). The ends contribute 2πr² — one πr² circle each — and the curved side contributes 2πrh, which is the circumference of the base times the height, as if you unrolled the side into a rectangle. Volume is simpler: V = π × r² × h, the area of the circular base times the height. Surface area comes out in square units and volume in cubic units, so centimetres in give square centimetres and cubic centimetres out.

Worked example: radius 3 and height 5 give surface area 2 × π × 3 × 8 = 150.80 and volume π × 9 × 5 = 141.37.

Second worked example: a steel water drum has radius 7 cm and height 10 cm. Surface area is 2 × π × 7 × (7 + 10) = 2 × π × 7 × 17 = 747.70 cm², counting both ends and the curved side. Volume is π × 7² × 10 = π × 49 × 10 = 1,539.38 cm³, or about 1.54 litres. The ends alone are 2 × π × 49 = 307.88 cm² and the curved side is 2 × π × 7 × 10 = 439.82 cm², and the two add to 747.70 cm².

Frequently asked questions

What does total surface area include?

Both circular ends plus the curved side: 2πr² for the ends and 2πrh for the side, combined as 2πr(r + h). If you only want the curved side — for a label wrapped around a tin, for example — use 2πrh on its own, and leave the ends out. The ends are half the answer on a short, wide cylinder.

What if I know the diameter?

Halve it first: radius = diameter / 2, then use the radius here. A drum 14 cm across has a radius of 7 cm, and entering 14 as the radius would give four times the true area, because the radius is squared in both formulas. Check whether your measurement is across the whole circle or from the centre.

Is volume just base area times height?

Yes — a cylinder is a prism with a circular base, so volume = πr² × height. The same idea works for any prism: base area times height gives volume, whatever shape the base is. That is why the volume formula has no 2 in it, while the surface area formula does — the surface counts both ends.

What if the cylinder is open at the top?

Subtract one end: use πr² + 2πrh instead of 2πr(r + h). An open drum, a bucket or a paint tin has only one circular end, so the closed-cylinder total overstates the material by exactly one base circle. For the drum in the worked example, the open total would be 747.70 − 153.94 = 593.76 cm².

How do I convert cm² to m²?

Divide by 10,000, because 1 m² is 100 cm × 100 cm. The drum’s 747.70 cm² is 0.0748 m² — a small number, which is why square metres are a poor unit for small objects. Convert the other way by multiplying by 10,000, and keep area and volume separate: square centimetres never convert to litres.

Common mistakes

The most common mistake is entering the diameter as the radius. A drum 14 cm across has a radius of 7 cm, and entering 14 doubles every length in the formula — but because the radius is squared, the area and volume come out four times too big, not twice. Always halve an across-the-circle measurement first.

A second mistake is mixing up area and volume. Surface area is for paint, sheet metal and labels, and it comes in square units; volume is for capacity, and it comes in cubic units. Painting the outside of a drum needs the surface area, filling it needs the volume, and neither number answers the other question. If your answer has the wrong unit — litres for a painting job, square centimetres for a filling job — you have read the wrong line.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.