Raised Bed Soil Calculator formula — how it actually works
Every answer on the Raised Bed Soil Calculator comes from three short lines of arithmetic. There is no hidden step and no table of soil types to look up. The tool takes your length, width and depth, works out the area, then the volume, then the litres, then the bags, in that order.
volume = length × width × depth (cubic metres) litres = volume × 1000 bags = litres ÷ 40, rounded up
At a glance
Step one: the area
Area is length times width, in square metres. A bed 2.4 metres long and 1.2 metres wide has an area of 2.4 × 1.2 = 2.88 square metres. Area alone does not tell you how much soil you need, because a thin layer and a deep layer over the same area need very different amounts, which is why depth comes next.
Step two: the volume
Volume is area times depth, in cubic metres. For the bed at 0.3 metres deep, the volume is 2.88 × 0.3 = 0.864 cubic metres. Depth is the number people most often get wrong, because it is the smallest of the three and the easiest to misread: 0.3 metres is 30 centimetres, a normal raised bed depth, while 0.03 metres is only 3 centimetres, a dusting of soil.
Step three: the litres
One cubic metre holds 1,000 litres, so the litres are the volume times 1,000. For this bed that is 0.864 × 1,000 = 864 litres. Litres are the unit soil is usually sold in, so this is the number to quote when you order: 864 litres, not 0.864 cubic metres, which a supplier may have to convert back anyway.
Step four: the bags, rounded up
Bags are the litres divided by 40, because the tool counts 40 litre bags: 864 ÷ 40 = 21.6, rounded up to 22 bags. The tool rounds up rather than to the nearest whole bag, because rounding 21.6 down to 21 would leave you 24 litres short, and the spare 16 litres from the 22nd bag covers the soil settling after watering.
Worked example: the tool’s starting values
With 2 metres by 1 metre at 0.3 metres deep, the area is 2 square metres, the volume is 0.6 cubic metres, the litres are 600 and the bags are 15. Each step feeds the next, so a mistake in the area carries through to the bags, which is why measuring the length and width carefully is worth more than worrying about the bag arithmetic.
The common mistake
People multiply length by width by depth in the wrong units, mixing metres and centimetres in one line. If the length is 240 centimetres and the width is 1.2 metres, the area is not 288 square metres. Convert every measurement to metres first, then use the three lines above, and the formula stays exact.
Frequently asked questions
What is the Raised Bed Soil Calculator formula?
Volume = length × width × depth in cubic metres, litres = volume × 1,000, and bags = litres ÷ 40, rounded up.
How much soil does a 2.4 m by 1.2 m bed at 0.3 m deep need?
864 litres, which is 0.864 cubic metres, or 22 bags of 40 litres.
How many litres are in a cubic metre?
1,000 litres. So 0.864 cubic metres is 864 litres, and 0.6 cubic metres is 600 litres.
Why are the bags rounded up?
Because a fraction of a bag is still a bag you need. 21.6 bags means 22 bags, since 21 bags would hold only 840 litres, 24 litres short.
More guides on the Raised Bed Soil Calculator
- How to use the Raised Bed Soil Calculator — step by step
- Raised Bed Soil Calculator explained with worked examples
- Raised Bed Soil Calculator for beginners — start here
- Common mistakes people make with the Raised Bed Soil Calculator
- Raised Bed Soil Calculator vs doing it by hand — which is faster?
- Raised Bed Soil Calculator — the complete guide
- How to get an accurate result from the Raised Bed Soil Calculator
- Raised Bed Soil Calculator for students — with examples
- Raised Bed Soil Calculator for homeowners and DIYers
Try the Raised Bed Soil Calculator — free, in your browser.