← All blog posts

How to get an accurate result from the Raised Bed Soil Calculator

WhiteUI · A plain-English guide to the Raised Bed Soil Calculator

An accurate soil result comes from three habits: measure inside the bed twice, convert every measurement to metres before you type it, and add about 10 percent for soil settling after watering. The Raised Bed Soil Calculator already uses exact arithmetic, so most accuracy problems come from what is typed in, not from the tool.

At a glance

Measured bed: 0.864 m³ on a 0 to 1.5 m³ scale0 m³0.75 m³1.5 m³0.864 m³ = 864 litres = 22 bags
A bed 2.4 metres by 1.2 metres at 0.3 metres deep needs 0.864 cubic metres of soil, past halfway on a 0 to 1.5 cubic metre scale.

Measure twice, inside the bed

Measure the length and the width in two places each, inside the bed where the soil will sit, because timber beds are rarely perfectly straight. If one side measures 2.4 metres at one end and 2.35 at the other, use 2.4. The same goes for depth: measure it in three places and use the largest reading, because the deepest spot decides how much soil the whole bed needs.

Worked example: a measured bed

Take a bed 2.4 metres long, 1.2 metres wide and 0.3 metres deep. The area is 2.4 × 1.2 = 2.88 square metres. The volume is 2.88 × 0.3 = 0.864 cubic metres. The litres are 0.864 × 1,000 = 864 litres. The bags are 864 ÷ 40 = 21.6, rounded up to 22 bags. This is a case where the decimals matter: rounding the length down to 2 metres would give only 2 × 1.2 × 0.3 = 0.72 cubic metres, or 720 litres, which is 144 litres short.

Add 10 percent for settling

Soil settles after watering and under its own weight, so add about 10 percent before you order. For the measured bed above, 864 × 1.1 = 950.4 litres, which is about 950 litres, and 950.4 ÷ 40 = 23.76, rounded up to 24 bags. You can add it by raising the depth a little in the tool, or by multiplying the litres by 1.1 yourself. Either way, a small surplus is far cheaper than a second delivery for a few litres of soil.

Round only at the end

Keep the full decimals through the calculation and round only the final bag count. The measured bed gives 21.6 bags, which rounds up to 22. If you had rounded the volume down to 0.86 cubic metres first, you would get 860 litres and still 22 bags here, but on other beds an early rounding can move the bag count by one or two, and the error is always in the wrong direction.

Check the answer backwards

Convert the answer back to the starting numbers and see if you land where you began. From 22 bags, the litres are 22 × 40 = 880 litres, which is 0.88 cubic metres, and that matches the 0.864 cubic metres within the rounding up to whole bags. A gap bigger than a bag or two would mean an input was wrong, most likely the depth, which is the smallest number and the easiest to mistype.

The common mistake

People measure the depth once, in the shallowest spot. If the real depth varies from 0.25 to 0.3 metres and you measure only the 0.25 spot, you will order a sixth less soil than the deep end needs. For a 2 by 1 bed, 0.25 metres deep is 500 litres and 13 bags, while 0.3 metres deep is 600 litres and 15 bags, a difference of 2 bags. Measure the depth in several places and use the largest reading, then add the 10 percent on top.

Frequently asked questions

How much soil does a 2.4 m by 1.2 m bed at 0.3 m deep need?

864 litres, which is 0.864 cubic metres, or 22 bags of 40 litres.

How much extra soil should I add for settling?

About 10 percent. For 864 litres, order about 950 litres, which is 24 bags of 40 litres.

How do I check my soil answer?

Work backwards: 22 bags is 880 litres, or 0.88 cubic metres, which should match your volume within the rounding up to whole bags.

Why should I measure the depth in several places?

Because beds are uneven. The deepest spot decides how much soil the bed needs, so use the largest depth reading.

More guides on the Raised Bed Soil Calculator

Try it yourself

Try the Raised Bed Soil Calculator — free, in your browser.

Open the Raised Bed Soil Calculator