← All tools/Tools/Garden & Outdoor/Pool Chemical Calculator

Pool Chemical Calculator

Enter your pool size, current and target chlorine levels, and see how much chlorine product to add — in grams.

m
m
m
ppm
ppm
%

Chlorine product to add

73.8 g

48,000 L pool · +1 ppm

0 ppm1.5 ppm3 ppm free chlorine
Pool volume48,000 L (48 m³)
Chlorine rise needed1 ppm
Active chlorine48 g
Product to add73.8 g

Pool chemicals are hazardous — follow the product label, wear gloves and eye protection, and never mix chlorine products. Add chemicals to water, never water to chemicals.

How it works

Active chlorine (g) = ppm rise × pool litres ÷ 1,000
Product = active chlorine ÷ product strength

An 8 m × 4 m × 1.5 m pool holds 48 m³ = 48,000 L. Raising free chlorine by 1 ppm needs 1 × 48,000 ÷ 1,000 = 48 g of active chlorine. With 65% calcium hypochlorite, that is 48 ÷ 0.65 = 73.8 g of product.

Frequently asked questions

What is free chlorine?

The chlorine available to sanitise the water. Keep it between 1 and 3 ppm for a home pool; below 1 ppm the water is not properly sanitised.

Why divide by the product strength?

The product is not pure chlorine — 65% calcium hypochlorite is 65% active chlorine. You need more product than the active dose: 48 g ÷ 0.65 = 73.8 g.

What if my target is lower than my current level?

Then no chlorine is needed — the page shows 0 g. Let the level fall naturally, and retest before adding more.

How soon can I swim after adding chlorine?

Wait until the pump has run and the level is back in the 1–3 ppm range — usually a few hours. Follow the product label.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.