mulch calculator — the complete guide
Mulch is a layer of bark, wood chip, straw or compost spread over bare soil. It holds moisture in, keeps weeds down, protects roots from heat and cold, and breaks down slowly into the soil. This guide covers everything the Mulch Calculator does — the three inputs, the formula, the depths, the bag sizes and the worked numbers for the bed sizes most gardens actually have.
At a glance
The three inputs
First, the bed area in square metres: length times width for a rectangle, or the sum of the rectangles for an L-shaped bed. Second, the depth in centimetres, usually 5, 7.5 or 10. Third, the bag size in litres, commonly 40, 50 or 60. Those three numbers are all the tool needs, and changing any one of them changes the answer.
Depths: 5, 7.5 and 10 centimetres
Five centimetres is a light layer — enough to tidy a bed and hold some moisture, but thin enough that weeds can push through. Seven and a half centimetres is the usual choice for a new bed: thick enough to block most weeds and hold moisture through a dry week. Ten centimetres is a thick layer for beds where weeds are a real problem, or for bare soil that has never been mulched. More than 10 centimetres can starve the soil of air, so the tool’s own guidance stops there. For a 10 square metre bed the three depths give 500, 750 and 1,000 litres — a spread of 500 litres from the thinnest to the thickest choice.
Bag sizes: 40, 50 and 60 litres
For 750 litres, 40 litre bags give 750 ÷ 40 = 18.75, rounded up to 19 bags. Fifty litre bags give 750 ÷ 50 = 15 bags exactly. Sixty litre bags give 750 ÷ 60 = 12.5, rounded up to 13 bags. Smaller bags mean more bags to carry, but they are lighter to lift; larger bags mean fewer trips from the car. The volume is the same either way — only the count changes.
Worked example: a 12 square metre bed
A bed 6 metres by 2 metres is 12 square metres. At 7.5 centimetres it needs 12 × 7.5 × 10 = 900 litres, which is 15 bags of 60 litres. At 5 centimetres it needs 600 litres, or 10 bags. At 10 centimetres it needs 1,200 litres, or 20 bags. The three answers sit in a neat line — 10, 15, 20 bags — because the depth is the only thing changing.
Two beds at once
Add the areas before you use the tool, if the depth is the same for both. A bed of 6 square metres and a bed of 4 square metres make 10 square metres together, and at 7.5 centimetres that is 750 litres, or 13 bags of 60 litres. If the depths differ, work each bed out on its own and add the bag counts.
The common mistake
People pick the depth from the bag label instead of from the bed. The bag tells you its size in litres, not how deep to spread it. Depth is your choice — 5, 7.5 or 10 centimetres — and the bag size is the shop’s choice. Keep the two apart and the numbers stay right.
Frequently asked questions
How much mulch do I need for a 10 m² bed?
500 litres at 5 cm, 750 litres at 7.5 cm and 1,000 litres at 10 cm. At 7.5 cm that is 13 bags of 60 litres.
How deep should mulch be?
Between 5 and 10 cm is typical. Use 7.5 cm for most new beds, 5 cm for a light top-up and 10 cm where weeds are a problem.
How many 40 litre bags are in 750 litres?
19 bags. The maths is 750 ÷ 40 = 18.75, rounded up to 19.
Can I add two beds together in the tool?
Yes, if the depth is the same for both. Add the areas first, then enter the total. If the depths differ, work each bed out on its own.
What is mulch for?
It holds moisture in the soil, keeps weeds down, protects roots from heat and cold, and breaks down slowly into the soil.
More guides on the Mulch Calculator
- How to use the Mulch Calculator — step by step
- Mulch Calculator explained with worked examples
- Mulch Calculator formula — how it actually works
- Mulch Calculator for beginners — start here
- Common mistakes people make with the Mulch Calculator
- Mulch Calculator vs doing it by hand — which is faster?
- How to get an accurate result from the Mulch Calculator
- Mulch Calculator for students — with examples
- Mulch Calculator for homeowners and DIYers
Try the Mulch Calculator — free, in your browser.