← All tools/Tools/Garden & Outdoor/Firewood Calculator

Firewood Calculator

Measure your firewood stack and find out how many cords — and face cords — you actually have.

ft
ft
ft

Measure a neatly stacked pile, log ends facing out. A standard cord is 128 cubic feet of stacked wood; a face cord is one-third of a cord.

Firewood in this stack

—

Cords in this stack

A stacked cord, log ends out — 8 ft long, 4 ft high, 4 ft deep.

How it works

Volume = length × width × height
Cords = volume ÷ 128 cu ft (one cord = 128 cu ft)
Face cords = cords × 3 (one face cord = ⅓ cord)
1 m³ = 35.31 cu ft; 128 cu ft = 3.62 m³

A cord is a measure of stacked volume, not of solid wood: 128 cubic feet of neatly stacked logs, including the air gaps between them, usually stacked 8 ft long, 4 ft high and 4 ft deep. The calculator first works out the volume of your stack — length × width × height — then divides by 128 to get cords, and multiplies by 3 for face cords, since a face cord is one-third of a full cord. Switch the unit toggle to metres and it does the same sum in cubic metres, using 1 m³ = 35.31 cu ft, so 128 cu ft works out to 3.62 m³. The formula applies to any rectangular stack; for an irregular pile, measure the longest, widest and tallest points and treat the answer as an upper estimate. It says nothing about heat: a cord of hardwood and a cord of softwood hold the same volume but very different amounts of energy, and wet wood weighs more and burns worse than dry wood of the same size.

Worked example: a stack 8 ft long, 4 ft deep and 4 ft high holds 8 × 4 × 4 = 128 cu ft, which is exactly 1 cord — and 3 face cords. A smaller stack, 4 × 4 × 4 ft, holds 64 cu ft, which is 0.5 cords or 1.5 face cords.

Second worked example: in metres, a stack 2 m long, 1 m deep and 1.2 m high holds 2 × 1 × 1.2 = 2.4 m³. That is 2.4 ÷ 0.0283168 = 84.76 cu ft, which is 84.76 ÷ 128 = 0.66 cords — and 0.66 × 3 = 1.99 face cords, near enough two face cords.

Frequently asked questions

What is a cord of firewood?

A standard unit of stacked firewood: 128 cubic feet, usually stacked 8 ft long, 4 ft high and 4 ft deep. It is a measure of stacked volume, including the air gaps between logs.

What is a face cord?

One-third of a full cord — a stack 8 ft long and 4 ft high, but only as deep as one log (usually about 16 inches). The stack in the example holds 3 face cords.

Do I measure the logs or the stack?

The stack. Measure the outside of the neatly stacked pile — length, depth and height — because a cord is defined by stacked volume, not by the solid wood alone.

Does the wood type change the answer?

No — the volume is the same whatever the species. Hardwoods and softwoods differ in how much heat a cord gives, not in how many cords the stack holds.

Why is my delivered “cord” smaller than this?

Loosely thrown wood takes up more space than a tight stack, so a thrown load settles to less than a stacked cord. Always compare prices per stacked cord, and measure the stack once it is piled.

What the result means when you buy

In India firewood is usually sold by weight — by the kilogram, quintal or tractor load — rather than by the cord, so this calculator is most useful when a seller quotes a stacked volume or when you want to check what a delivery actually contains. A “cord” that arrives loosely thrown in a truck will settle to much less than a stacked cord once you pile it, so measure the stack after piling, not the load in the truck, and compare prices per stacked cord, not per load. Seasoning matters more than species for day-to-day use: wood dried for six months or more lights easily and burns clean, while green wood hisses, smokes and leaves creosote in the chimney. As a rough guide, a small household using wood for cooking a few hours a day gets through roughly a face cord every two to three weeks in winter, so a full cord is about six to nine weeks of cooking — work out your own rate from one measured stack before ordering a season’s worth.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.