← All blog posts

QR Code Generator for homeowners and DIYers

WhiteUI · A plain-English guide to the QR Code Generator

Around the house, a QR code is a shortcut: a guest scans a code on the fridge and joins the Wi-Fi, a visitor scans a code by the front door and opens a contact page, or a label on a storage box opens a list of what is inside. The QR Code Generator makes those codes free, in your browser, with no sign-up, and the PNG it downloads prints well enough for a card, a label or a sign.

At a glance

A Wi-Fi code holds 34 characters34 characters used466 characters leftShort text makes a small, easy-to-scan grid
A Wi-Fi code for a home network is 34 characters long, a small slice of the 500 characters the box accepts, so it makes a small, easy-to-scan grid.

A Wi-Fi code for guests

The most useful home code is a Wi-Fi code, so guests can join without you reading out a long password. Type a Wi-Fi string in the form “WIFI:T:WPA;S:HomeNet;P:teapot-42;;”, which is 34 characters long, keep the size at 512 px and keep error correction on M. The tool draws the code, and the line underneath should show the character count as 34. Print it at 512 px, stick it on the fridge, and a guest’s phone should offer to join the network called HomeNet. Test it with your own phone first, and change the password in the string if you ever change the Wi-Fi password, because the code holds the old one until you make a new code.

A code for the front door

Put a code by the front door that opens a contact page, such as “https://whiteui.com/contact”, which is 27 characters long. Pick 1,024 px, because a code by a door is scanned from a step back, and pick error correction H, which recovers about 30 percent of damaged modules, because a code outdoors gets rained on and faded. At version 2, 1,024 px gives a canvas 1,000 px across, with each module 40 px wide, which prints clearly at a good size. Laminate the print, scan the laminated copy, and replace it when it fades.

Labels for the garage and garden

Label storage boxes, paint tins and garden beds with codes that open a note or a list. A short message, such as a list of what is in a box, fits easily inside the 500-character limit, and a code for a short link is even smaller. Use 512 px for a label and error correction M, which recovers about 15 percent of damaged modules, because a label in a garage gets dusty and knocked. Print one label, stick it on, and scan it in place before you print the rest of the set.

Printing a code that scans first time

Print the code at least a few centimetres across, and bigger for a code that will be scanned from a distance. Use dark ink on white paper, because a code printed in pale grey on a coloured background is hard for a phone to read, and a glossy print can reflect light into the camera. The tool’s default code, “https://whiteui.com” at 256 px and M, is a version 2 grid of 25 × 25 modules with a canvas 250 px across, which is fine for a card; for a sign, use 1,024 px instead, which gives a 1,000 px canvas at the same version.

Codes that last

A QR code never expires, so a code for a page that stays live keeps working for as long as that page is there. That makes it good for a house manual, a garden plan or a contact page, and bad for anything that changes often, such as a Wi-Fi password or a temporary link. When something changes, make a new code and replace the old print; the old code will keep opening the old address until you take it down.

The common mistake

Homeowners often print a code once, stick it up, and never scan the printed copy. A code that scans on screen can fail on paper if the print is too light, too small or on glossy paper, and a code for a Wi-Fi password with one wrong letter will offer to join a network that does not exist. Scan the printed copy in its real place, in the light people will use, before you call the job done.

Frequently asked questions

How do I make a Wi-Fi QR code for guests?

Type a Wi-Fi string such as WIFI:T:WPA;S:HomeNet;P:teapot-42;; into the tool, which is 34 characters, print it at 512 px, and test it with your own phone first.

What size should I print a QR code for a front door?

Use 1,024 px, because the code is scanned from a step back. At version 2 that gives a 1,000 px canvas with each module 40 px wide.

Which error level is best for an outdoor QR code?

H, which recovers about 30 percent of damaged modules, because a code outdoors gets rained on and faded. M, at about 15 percent, is enough indoors.

Does a QR code for my Wi-Fi expire?

No, the code itself never expires. But if you change the Wi-Fi password, make a new code, because the old code still holds the old password.

More guides on the QR Code Generator

Try it yourself

Try the QR Code Generator — free, in your browser.

Open the QR Code Generator