← All blog posts

How to get an accurate result from the QR Code Generator

WhiteUI · A plain-English guide to the QR Code Generator

An accurate QR code is one that opens exactly the link you meant, every time it is scanned. The QR Code Generator draws precisely what you type, so accuracy comes from checking the text, the version line and the scan, not from a setting hidden in the tool. Five checks, done in order, catch every common error before a code is printed.

At a glance

Check M: about 15% of damage is recoverable15% recoverable85% dataM is the default; a printed code still needs a clean, full scan
Error correction level M recovers about 15 percent of damaged modules, which helps a printed code survive small marks, but it does not fix a wrong link.

Check 1: type the full link

Type the address in full, starting with “https://”, and read it back letter by letter. The tool’s starting text, “https://whiteui.com”, is 19 characters long, and a single missing letter, such as “whiteu.com”, still makes a neat code that opens a page that does not exist. Copy the address from your browser’s address bar instead of typing it from memory, and delete any space at the start or end after pasting, because a trailing space becomes part of the code.

Check 2: read the version line

Under the code the tool prints a line like “Version 2 • 25 × 25 modules • error correction M (~15% recoverable) • 19 characters.” Read the character count first: it should match the length of the link you meant to type. For “https://whiteui.com/contact” the count should be 27, and a count of 28 means a space has slipped in somewhere. Then read the version: a short link should give a small version, and a sudden jump to a much bigger version means the text is longer than you thought, perhaps because a long tracking tail was pasted with it.

Check 3: scan the code on screen

Open your phone’s camera, point it at the code on screen, and look at the address it offers to open. It should be exactly the link you typed, with nothing added and nothing missing. Tap through to the page and check that it loads, because a link that scans correctly can still point at a page that was moved or deleted. This one scan is the most valuable check in the whole job, and it takes about five seconds.

Check 4: pick the right size and level for the print

Accuracy on screen is not accuracy on paper. A code that scans on a bright screen can fail when printed small, on glossy paper, or in pale ink. Pick 512 px for a handout and 1,024 px for a poster, and keep error correction on M, which recovers about 15 percent of damaged modules, unless the code will be handled roughly, when H, at about 30 percent, is worth picking. Print one copy at the size you plan to use, and scan that copy, not just the screen version.

Check 5: scan the printed copy in its real setting

Scan the printed code where it will actually be used: on the wall, on the card, or on the parcel, in the light people will scan it in. A code on a curved bottle, a code behind glass, or a code in dim light can all fail where a flat code in bright light succeeds. If the printed code is slow to read, print it bigger before you print a hundred copies; a bigger code at 1,024 px, with each module 40 px wide at version 2, reads far more easily than a small one.

Worked example

Try the full check on the default code: “https://whiteui.com”, 256 px, error correction M. The version line should read version 2, 25 × 25 modules, M, 19 characters, and the canvas should be 250 px across, because each module is 10 px wide. Scan it on screen and it should open the WhiteUI home page. Then change the text to “https://whiteui.com/contact”, 27 characters, and repeat the check: the character count should now read 27, and the scan should open the contact page. If both checks pass, your method is sound, and any later failure is in the new text, not in the tool.

The common mistake

People check the code by looking at it, not by scanning it. A QR code is not readable by eye, so looking at it tells you nothing about the link inside. Only a scan reads the text back, which is why the scan is the check, and the version line is the backup that tells you the text length and the grid size.

Frequently asked questions

How do I know my QR code is accurate?

Scan it with your phone and check the address it opens. The version line should also show the character count you expect, such as 19 for https://whiteui.com.

Why should I copy a link instead of typing it?

Typing from memory risks a missing letter, and the tool draws exactly what you type. Copying from the browser address bar avoids that error.

What size should I print a QR code at?

At least a few centimetres across, and bigger for a dense code. Pick 512 px for a handout and 1,024 px for a poster.

Does error correction fix a wrong link?

No. Error correction recovers damaged modules, about 15 percent at level M, but it cannot fix a link that was typed wrongly in the first place.

More guides on the QR Code Generator

Try it yourself

Try the QR Code Generator — free, in your browser.

Open the QR Code Generator