← All blog posts

Volume Converter formula — how it actually works

WhiteUI · A plain-English guide to the Volume Converter

Every conversion on the Volume Converter follows the same two-step formula. First the tool changes your number into litres. Then it changes those litres into the unit you asked for. There is no separate formula for each pair of units — one route handles them all.

litres = value × factor(from unit)
result = litres ÷ factor(to unit)

At a glance

10 US gallons = 37.85 litres37.85 LOut of 100 L10 × 3.78541 = 37.85 litres
Ten US gallons is 37.85 litres, a little over a third of 100 litres.

The factors the tool uses

Each unit has one factor, its size in litres: millilitres 0.001, litres 1, US gallons 3.78541, UK gallons 4.54609, cubic metres 1,000 and cubic feet 28.3168. Small kitchen units work the same way: 1 US cup is 0.236588 litres, 1 fluid ounce is 0.0295735 litres, 1 teaspoon is 0.00492892 litres and 1 tablespoon is 0.0147868 litres.

Worked example: 10 US gallons to cubic metres

Step one, to litres: 10 × 3.78541 = 37.8541 litres. Step two, to cubic metres: 37.8541 ÷ 1,000 = 0.0378541, which rounds to 0.0379 cubic metres. The same two steps give 10 US gallons = 37.85 litres, so either answer is the same volume written in a different unit.

Why litres sit in the middle

Litres are the natural bridge because most factors are simple in litres: 1 cubic metre is exactly 1,000 litres, and 1 litre is exactly 1,000 millilitres. Using one middle unit also means a new unit only needs one factor added, rather than a formula for every pair it could convert to.

The common mistake

People skip the bridge and guess a direct factor, such as treating a gallon as 4 litres. That gives 10 US gallons = 40 litres, which is 2.15 litres too high. Use 3.78541 for a US gallon and 4.54609 for a UK gallon, and the two-step formula stays exact.

Frequently asked questions

What is the volume conversion formula?

Convert to litres first (litres = value × factor of the starting unit), then divide by the factor of the target unit.

How many litres are in a cubic metre?

Exactly 1,000 litres. A cubic metre is a cube 1 metre on each side, and it holds 1,000 litres.

How many US gallons are in a cubic metre?

264.17 US gallons. Divide 1,000 litres by 3.78541 litres per US gallon.

Why does the tool use 3.78541 for a US gallon?

That is the exact definition: one US gallon is 3.785411784 litres, shortened to 3.78541 for display.

More guides on the Volume Converter

Try it yourself

Try the Volume Converter — free, in your browser.

Open the Volume Converter