Volume Converter for homeowners and DIYers
Round the house, volume shows up in four places: paint tins in litres, concrete in cubic metres, water tanks in litres or gallons, and recipes in cups and millilitres. The Volume Converter turns any of those into the unit on the tin, the bag or the recipe you are following.
At a glance
Paint: litres to gallons
Paint is usually sold by the litre, while some guides quote gallons. A 10 litre tin is 10 ÷ 3.78541 = 2.64172, so 2.64 US gallons. A 5 litre tin is 5 ÷ 3.78541 = 1.32086, so 1.32 US gallons. If a guide says you need 3 gallons for a room, that is 3 × 3.78541 = 11.36 litres, so buy a 10 litre tin plus a 2 litre tin rather than guessing.
Concrete: cubic metres to litres
Concrete is ordered by the cubic metre, but small jobs are easier to picture in litres. One cubic metre is 1,000 litres, so a small slab needing 0.1 cubic metres needs 0.1 × 1,000 = 100 litres of mixed concrete. A wheelbarrow holds roughly 65 to 80 litres, so 100 litres is about one and a half barrow loads.
Water tanks: litres to gallons
A 1,000 litre tank holds 1,000 ÷ 3.78541 = 264.172, so 264.17 US gallons. A 500 litre tank holds half that, 132.09 US gallons. Knowing both numbers helps when a pump or filter is rated in gallons and the tank is marked in litres.
Cooking: cups to millilitres
Kitchen work uses the same tool. Two cups of stock is 2 × 236.588 = 473.176, so 473.18 millilitres — pour to just under the 475 mL mark on a metric jug. A 1.5 litre bottle of oil is 1,500 ÷ 236.588 = 6.34 cups if a recipe counts in cups.
The common mistake
People order concrete or paint in the wrong unit and end up short. A 0.1 cubic metre order is 100 litres, not 10 litres, and a 5 litre tin is 1.32 gallons, not 5 gallons. Convert first, then order, and check the number against the size of the job before you pay.
Frequently asked questions
How many US gallons are in a 10 litre tin of paint?
2.64 US gallons. Divide 10 by 3.78541 litres per US gallon.
How many litres are in 0.1 cubic metres of concrete?
100 litres. Multiply 0.1 by 1,000 litres per cubic metre.
How many US gallons does a 1,000 litre water tank hold?
264.17 US gallons. Divide 1,000 by 3.78541.
How many millilitres are in 2 cups?
473.18 millilitres. One US cup is 236.588 millilitres, so double it.
More guides on the Volume Converter
- How to use the Volume Converter — step by step
- Volume Converter explained with worked examples
- Volume Converter formula — how it actually works
- Volume Converter for beginners — start here
- Common mistakes people make with the Volume Converter
- Volume Converter vs doing it by hand — which is faster?
- volume converter — the complete guide
- How to get an accurate result from the Volume Converter
- Volume Converter for students — with examples
Try the Volume Converter — free, in your browser.