← All tools/Converters/Density/Density Converter

Density Converter

Convert density between kg/m³, g/cm³, lb/ft³ and other units.

In grams per cubic centimetre

—

Compared with water

How it works

All units convert through kg/m³: 1 g/cm³ = 1,000 kg/m³, 1 kg/L = 1,000 kg/m³, 1 lb/ft³ = 16.0185 kg/m³, 1 t/m³ = 1,000 kg/m³

This converts density units — to calculate density, use the Density Calculator.

Density is mass divided by volume, so every density unit is a mass unit over a volume unit. The converter routes every value through kilograms per cubic metre (kg/m³), the SI unit, and then out to the unit you want. That is why the table shows the same density in all five units at once. A gram per cubic centimetre (g/cm³) is exactly 1,000 kg/m³, because one gram is a thousandth of a kilogram and one cubic centimetre is a millionth of a cubic metre — the two factors combine to 1,000. A kilogram per litre (kg/L) is the same as a gram per cubic centimetre, since a litre is exactly 1,000 cubic centimetres, and a tonne per cubic metre (t/m³) is also 1,000 kg/m³. Pounds per cubic foot (lb/ft³) is the imperial unit: one pound per cubic foot equals 16.0185 kg/m³. These are pure unit changes, so the result is exact to the precision shown — the converter does not adjust for temperature, and a liquid’s density falls slightly as it warms.

Worked example: 1,000 kg/m³ is 1.00 g/cm³ — exactly the density of water — and 62.43 lb/ft³.

Worked example 2: mustard oil sold in Indian kitchens has a density of about 0.92 g/cm³. That is 0.92 × 1,000 = 920 kg/m³, and 920 ÷ 16.0185 = 57.43 lb/ft³. A 2-litre bottle of that oil weighs 920 × 0.002 = 1.84 kg, because 2 litres is 0.002 cubic metres — noticeably less than 2 kg of water, which is why oil floats on water.

What the result means

When the answer is close to 1.00 g/cm³, the material is about as dense as water: it will just about float or sink in it. Below 1.00 it floats — cooking oil at 0.92 g/cm³, petrol at about 0.74 g/cm³ — and above 1.00 it sinks, like milk at about 1.03 g/cm³ or honey at about 1.42 g/cm³. Concrete sits around 2.40 g/cm³ and steel around 7.85 g/cm³, which is why a steel vessel sinks fast and a wooden one floats. The common mistake is reading the number without its unit: 62.43 lb/ft³ and 1.00 g/cm³ are the same density, but 62.43 g/cm³ would be impossible for any ordinary material. Another is treating density as weight: two bottles can hold the same volume but different weights if their densities differ, which is why a litre of ghee weighs about 0.91 kg while a litre of water weighs exactly 1 kg. If your result looks wrong by a factor of 1,000, you have almost certainly mixed up g/cm³ with kg/m³ — the most common slip on this page.

Frequently asked questions

What is the density of water?

Pure water is 1,000 kg/m³, or 1.00 g/cm³, at about 4 °C. It is the reference most density comparisons use.

Does temperature change density?

Yes. Most liquids expand as they warm, so their density falls. The conversions here are unit conversions only and do not adjust for temperature.

When is lb/ft³ used?

It is common in construction and engineering in the United States, for example for soil, concrete and timber densities.

Can I convert g/cm³ to kg/m³ by multiplying by 1,000?

Yes — that is the exact factor. 1 g/cm³ = 1,000 kg/m³, so 0.92 g/cm³ is 920 kg/m³. The same factor works in reverse: divide kg/m³ by 1,000 to get g/cm³. The only unit here that needs a different factor is lb/ft³, which is 16.0185 kg/m³.

How do I work out the weight of a liquid from its density?

Multiply the density by the volume, in matching units. A liquid at 920 kg/m³ in a 2-litre (0.002 m³) bottle weighs 920 × 0.002 = 1.84 kg. The trap is mixing litres with cubic metres: 2 litres is 0.002 m³, not 2 m³, so check the volume unit before you multiply.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.