← All tools/Converters/Density
Density Converters
Convert between density units.
About these density converters
Density is mass divided by volume — how heavy a thing is for its size. It decides whether something floats or sinks, how much a litre of an ingredient weighs, and how heavy a beam or a block of concrete will be. This page holds the density converters, for moving a density between kilograms per cubic metre, grams per cubic centimetre, kilograms per litre, pounds per cubic foot and tonnes per cubic metre.
The two units you will meet most often are grams per cubic centimetre and kilograms per cubic metre, and they are a thousand apart: 1 g/cm³ is 1,000 kg/m³. Water is the reference point at 1 g/cm³, so anything denser than water sinks and anything lighter floats. Cooking usually works in grams per cubic centimetre or kilograms per litre, while materials and engineering work in kilograms per cubic metre — steel is about 7,850 kg/m³, concrete about 2,400 kg/m³ and wood anywhere from 300 to 900 kg/m³.
Convert before you compare. A recipe that gives honey by the cup and a supplier who sells it by the kilogram are talking about the same ingredient in different units, and a structural drawing in kg/m³ cannot be checked against a material sheet in lb/ft³ without converting first. The Density Converter handles the conversion in either direction, with the kilogram per cubic metre as the base unit.
Which one to use
There is one tool on this page: the Density Converter. Use it whenever a density is in the wrong unit for the job at hand.
- For cooking: convert between g/cm³ and kg/L when a recipe gives volume and the scales give weight, or when scaling ingredients up or down.
- For materials and engineering: work in kg/m³ or tonnes/m³, the units material data sheets and structural drawings use.
- For older imperial data sheets: convert lb/ft³ into kg/m³ before comparing it with a metric specification.
Frequently asked questions
How do I convert g/cm³ to kg/m³?
Multiply by 1,000. One gram per cubic centimetre is 1,000 kilograms per cubic metre, so water at 1 g/cm³ is 1,000 kg/m³ and steel at 7.85 g/cm³ is 7,850 kg/m³. The Density Converter does the same conversion in either direction.
What is the density of water?
Pure water is 1 g/cm³ — 1,000 kg/m³ — at about 4 °C, where it is at its densest. It is the reference point for density: materials denser than 1 g/cm³ sink in water, and lighter ones float.
Why does density matter in cooking?
Recipes mix volume and weight — a cup of honey weighs far more than a cup of flour. Knowing an ingredient’s density lets you turn cups into grams and scale a recipe up or down without guessing, which matters most for baking.
Which density unit do engineers use?
Kilograms per cubic metre, the SI unit — material data sheets list steel, concrete and timber in kg/m³. Grams per cubic centimetre is the same scale divided by a thousand and is common in labs and cooking, while pounds per cubic foot still appears on older imperial data sheets.