How to use the Data Storage Converter — step by step
Converting a storage size is a small job that turns up all the time: a 2 GB file that has to fit on a drive measured in MB, a phone plan quoted in GB when your photos are counted in MB. The Data Storage Converter does the arithmetic for you, in both directions, on the base you choose.
Step 1: type the number
Open the tool and type your value into the Value box. Try 2, the size of a short video file in GB. The tool starts with 1,024 in the box as an example, so replace it rather than adding to it.
Step 2: pick the From unit
Choose the unit your number is in. For our example that is GB, for gigabytes. The tool covers bytes, KB, MB, GB, TB and PB, so the unit you have is almost certainly there.
Step 3: pick the To unit
Choose the unit you want the answer in. Here that is MB, for megabytes. The result appears straight away, as you type — there is no button to press.
Step 4: check the base
The tool has two bases. The 1024 base is the one computers traditionally use: 1 GB = 1,024 MB. The 1000 base is the one drive makers print on the box: 1 GB = 1,000 MB. The tool defaults to 1024. If you are comparing with a number on a drive box, switch to 1000 first, or the two answers will not match.
Worked example: 2 GB to MB
With the 1024 base, 2 GB becomes 2 × 1,024 = 2,048 MB. That is the whole calculation: multiply by 1,024 for each step down the ladder. Going the other way, 2,048 MB ÷ 1,024 = 2 GB.
At a glance
The common mistake
The usual error is converting in the wrong direction: multiplying when you should divide. If your answer comes out smaller than you expected when you moved to a smaller unit, you divided by mistake. Going from GB to MB the number must get bigger — 2 GB is 2,048 MB, not 0.002 MB.
Frequently asked questions
How do I convert GB to MB?
Type the number, set From to GB and To to MB, and read the answer. On the 1024 base, multiply the GB figure by 1,024: 2 GB is 2,048 MB.
What is the difference between the 1000 and 1024 bases?
On the 1024 base, 1 GB is 1,024 MB; on the 1000 base, 1 GB is 1,000 MB. Computers usually use 1024, drive makers usually print 1000.
Do I need to press a button to get the answer?
No. The result updates as you type, and it updates again whenever you change a unit or the base.
Can the tool convert bytes to petabytes?
Yes. It covers bytes, KB, MB, GB, TB and PB, in either direction, on either base.
More guides on the Data Storage Converter
- Data Storage Converter explained with worked examples
- Data Storage Converter formula — how it actually works
- Data Storage Converter for beginners — start here
- Common mistakes people make with the Data Storage Converter
- Data Storage Converter vs doing it by hand — which is faster?
- data storage converter — the complete guide
- How to get an accurate result from the Data Storage Converter
- Data Storage Converter for students — with examples
- Data Storage Converter for homeowners and DIYers
Try the Data Storage Converter — free, in your browser.