data storage converter — the complete guide
This guide covers everything the Data Storage Converter does: the units, the two bases, the formula, and the worked examples you need to use it with confidence. If you only read one post about this tool, make it this one.
The units, smallest to largest
Byte (B) is the smallest unit — one character of text. Kilobyte (KB) is 1,024 bytes. Megabyte (MB) is 1,024 KB. Gigabyte (GB) is 1,024 MB. Terabyte (TB) is 1,024 GB. Petabyte (PB) is 1,024 TB. The tool converts between any two of these, in either direction. Note this tool converts amounts of data, not speeds: if you need megabits per second, that is the Data Transfer Rate Converter, a different tool for a different job.
The two bases
On the 1024 base, each step multiplies by 1,024 — this is how computers have traditionally counted, and it is the tool’s default. On the 1000 base, each step multiplies by 1,000 — this is how drive makers label their products. The two bases give different answers: 1 TB is 1,024 GB on the 1024 base and 1,000 GB on the 1000 base. Pick the base that matches your source, and do not mix them in one comparison.
Worked example: a 20 GB game
A game download of 20 GB is 20 × 1,024 = 20,480 MB. On a 256 GB drive it takes 20 ÷ 256 = 7.8% of the space, leaving 236 GB free. In bytes it is 20 × 1,073,741,824 = 21,474,836,480 bytes. One number, four ways of saying it, and the tool gives you all of them.
At a glance
Bits vs bytes
1 byte = 8 bits. Storage is almost always quoted in bytes (GB, MB), while network speeds are quoted in bits (Mbps). A 100 Mbps connection moves 12.5 MB per second, so that 20 GB game takes 20,480 ÷ 12.5 = 1,638 seconds, or about 27 minutes, to download. Keep the two apart and the numbers stop surprising you.
The common mistake
The most common mistake is comparing a number from one base with a number from the other — for example, wondering why a 1 TB drive shows 931 GB on your computer. It shows 931 GB because 1,000,000,000,000 bytes divided by 1,024 three times is 931.32 GB. Same drive, different ruler.
Frequently asked questions
What units does the Data Storage Converter cover?
Bytes, KB, MB, GB, TB and PB, in either direction, on the 1024 or 1000 base.
How many GB are in 1 TB?
1,024 GB on the 1024 base, or 1,000 GB on the 1000 base.
Does this tool convert internet speeds?
No. It converts amounts of data, like GB and MB. Speeds in Mbps are the job of the Data Transfer Rate Converter, a different tool.
How long does a 20 GB download take on 100 Mbps?
100 Mbps is 12.5 MB per second, so 20,480 MB takes about 1,638 seconds, or roughly 27 minutes.
Why does my 1 TB drive show 931 GB?
The drive holds 1,000,000,000,000 bytes. Your computer divides by 1,024 three times, giving 931.32 GB.
More guides on the Data Storage Converter
- How to use the Data Storage Converter — step by step
- Data Storage Converter explained with worked examples
- Data Storage Converter formula — how it actually works
- Data Storage Converter for beginners — start here
- Common mistakes people make with the Data Storage Converter
- Data Storage Converter vs doing it by hand — which is faster?
- How to get an accurate result from the Data Storage Converter
- Data Storage Converter for students — with examples
- Data Storage Converter for homeowners and DIYers
Try the Data Storage Converter — free, in your browser.