Exam score needed practice problems with answers
Try these before you peek at the answers. Each one uses only the formula from this guide, and each answer shows its working so you can find where you went wrong if you differ.
Question: Current 85% at 40%, exam 60%, target 80% — what exam score is needed? Answer: (80 − 85 × 0.40) ÷ 0.60 = (80 − 34) ÷ 0.60 = 76.67%.
Question: Current 70% at 80%, exam 20%, target 75% — what exam score is needed? Answer: (75 − 70 × 0.80) ÷ 0.20 = (75 − 56) ÷ 0.20 = 95.00%.
Question: Current 95% at 50%, exam 50%, target 90% — what exam score is needed? Answer: (90 − 95 × 0.50) ÷ 0.50 = (90 − 47.5) ÷ 0.50 = 85.00%.
If those felt straightforward, try the tool’s own worked example next: Current 75% worth 60%, exam worth 40%, target 80%: (80 − 75 × 0.60) ÷ 0.40 = (80 − 45) ÷ 0.40 = 35 ÷ 0.40 = 87.50%.
A second example: current 80% worth 50%, exam 50%, target 85% gives (85 − 80 × 0.50) ÷ 0.50 = (85 − 40) ÷ 0.50 = 90.00%. A third check: current 70% worth 60%, exam 40%, target 75% gives (75 − 70 × 0.60) ÷ 0.40 = (75 − 42) ÷ 0.40 = 82.50%.
The same student, a heavier exam
Change only the exam’s weight and watch the answer move. A student at 72% aiming for 80%, with the exam worth 40% of the grade, needs (80 − 72 × 0.60) ÷ 0.40 = (80 − 43.20) ÷ 0.40 = 92.00%. Nearly a perfect paper, because 60% of the grade is already fixed at 72%.
Give the same student an exam worth 60% instead and the answer is (80 − 72 × 0.40) ÷ 0.60 = (80 − 28.80) ÷ 0.60 = 85.33%. Same current score, same target — but the score needed falls by almost 7 points, because more of the grade is still open.
That is why the weight is the first number to check, not the last. Two students with the same scores and the same target can need very different exam marks, and the only difference is how much of the grade the exam still decides.
Where practice answers usually go wrong
Three slips account for most wrong practice answers. The first is typing the weight as a whole number — 60 instead of 0.60. The calculator reads weights as decimals, so 60 means sixty times the grade, and the answer comes out nonsense.
The second is skipping the multiplication. The formula needs the current score times its weight first: 72 × 0.60 = 43.20, then 80 − 43.20. Leave the multiplication out and you get (80 − 72) ÷ 0.40 = 20% — a score below the target for a student chasing a higher grade, which should look wrong at once.
The third is dividing by the wrong weight. The divisor is the exam’s weight, 0.40, not the current score’s weight. Swap them and the answer changes completely. After every practice question, check the answer against the target: when you are below your target, the score you need sits above it.
Frequently asked questions
How do I check my practice answers?
Work each question by hand with the formula, then compare. A match to two decimal places means you have it; a gap means an input or a step differs.
What if I get stuck on a question?
Go back to the worked example for the same tool and follow its steps with your numbers substituted in.
What if my result looks wrong?
Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.
More guides on the Exam Score Needed Calculator
- Exam score needed explained in plain English
- How to calculate Exam score needed (with formula)
- Exam score needed formula, with a worked example
- Exam score needed for beginners: the complete guide
- Exam score needed: common mistakes and how to avoid them
- Exam score needed quick reference and cheat sheet
- Exam score needed in everyday life: practical examples
- Exam score needed vs similar tools: when to use which
- How accurate is a Exam score needed tool? What it can’t tell you
Enter your current score and its weight, your exam weight and your target to see the exam score you need.