← All blog posts

Cricket Strike Rate: worked example step by step

WhiteUI · A plain-English guide to the Cricket Strike Rate Calculator

The best way to learn the strike rate formula is to work through real numbers slowly, one step at a time. This guide does exactly that, four times over, using the same steps the Cricket Strike Rate Calculator follows: divide the runs by the balls, then multiply by 100. Each example ends with a backwards check, so you can prove the answer to yourself instead of taking it on trust.

Bars showing 75 runs and 50 balls, giving a strike rate of 150.00
75 runs off 50 balls: divide 75 by 50 to get 1.5 runs per ball, then multiply by 100 to get 150.00.

Example 1: 75 runs off 50 balls

This is the calculator’s own default, so it is the easiest one to check against the tool. Step one, write down the two numbers: runs 75, balls 50. Step two, divide the runs by the balls: 75 ÷ 50 = 1.5. That is 1.5 runs per ball. Step three, multiply by 100: 1.5 × 100 = 150.00. The strike rate is 150.00. Check it backwards: 1.5 runs per ball × 50 balls = 75 runs, which is exactly where we started, so the answer is right.

Example 2: 50 runs off 40 balls

Step one: runs 50, balls 40. Step two, divide: 50 ÷ 40 = 1.25. That is 1.25 runs per ball — a run and a quarter each ball, on average. Step three, multiply by 100: 1.25 × 100 = 125.00. The strike rate is 125.00. Check it backwards: 1.25 × 40 = 50 runs, which matches. Notice that this batter scored fewer runs than the first example but faced fewer balls too, and the rate captures that: 125.00 is slower than 150.00, even though 50 runs is a decent score on its own.

Example 3: 100 runs off 60 balls

Step one: runs 100, balls 60. Step two, divide: 100 ÷ 60 = 1.6667. The division does not come out even, so keep four decimal places for now and round at the end. Step three, multiply by 100: 1.6667 × 100 = 166.67. The strike rate is 166.67. Check it backwards: 166.67 ÷ 100 = 1.6667 runs per ball, and 1.6667 × 60 = 100.00 to the nearest hundredth, which matches. A century off 60 balls is fast scoring in any format — more than a run and a half per ball.

Example 4: a slow innings — 25 runs off 50 balls

Step one: runs 25, balls 50. Step two, divide: 25 ÷ 50 = 0.5. That is half a run per ball. Step three, multiply by 100: 0.5 × 100 = 50.00. The strike rate is 50.00. Check it backwards: 0.5 × 50 = 25 runs, which matches. This is a slow innings in a one-day or T20 game, where 50.00 sits well below the strong mark of around 90, but it is a solid, normal rate in Test cricket, where 50 to 60 counts as solid. The same number means different things in different formats.

Summary table

RunsBallsStrike rate
7550150.00
5040125.00
10060166.67
255050.00

Read the table from left to right and the pattern is clear: more runs per ball means a higher strike rate, whatever the total. The 100 off 60 has the highest rate even though it is not the biggest total in the table, and the 25 off 50 has the lowest rate even though 25 runs is not a small score on its own.

Check your answer in one step

Every strike rate can be checked with one backwards sum: divide the strike rate by 100 to get runs per ball, then multiply by the balls faced. The result must be the runs you started with. For the four examples: 150.00 ÷ 100 × 50 = 75; 125.00 ÷ 100 × 40 = 50; 166.67 ÷ 100 × 60 = 100.00 to the nearest hundredth; 50.00 ÷ 100 × 50 = 25. If your check lands somewhere else, the error is almost always in the balls — usually overs counted instead of balls, or a wide counted as a ball faced. Fix the balls and the answer fixes itself.

Frequently asked questions

How do I check my strike rate answer?

Divide the strike rate by 100 to get runs per ball, then multiply by the balls faced. The result must be the runs you started with.

What if the runs are more than the balls?

That is normal for fast scoring. 100 off 60 balls gives 166.67, which is above 100 because the batter averaged more than a run a ball.

Do I round the answer?

The calculator shows two decimal places, so 100 ÷ 60 × 100 becomes 166.67. Rounding only at the end keeps the answer accurate.

Why does the calculator show two decimal places?

So that close rates can be told apart — 125.00 and 125.50 are different innings, and the extra digits keep them distinct.

More guides on the Cricket Strike Rate Calculator

Try it yourself

Try the Cricket Strike Rate Calculator — free, in your browser.

Open the Cricket Strike Rate Calculator