Cricket Strike Rate practice questions with answers
The fastest way to get comfortable with strike rate is to work through a few sums yourself, with the answers beside them so you can check as you go. The five questions below cover the three kinds of sum that come up in practice: batting strike rate, bowling strike rate, and working backwards from a target rate. Try each one on paper first, then read the working. The Cricket Strike Rate Calculator will check your batting answers if you want to confirm them.
Question 1: 45 runs off 30 balls
A batter scores 45 runs and faces 30 balls. What is their strike rate? Work it out: divide the runs by the balls, 45 ÷ 30 = 1.5, then multiply by 100, 1.5 × 100 = 150.00. The answer is 150.00. Check it backwards: 1.5 runs per ball × 30 balls = 45 runs, which matches. This is a brisk innings in any format — 150.00 sits above the T20 mark of 130 — and it is the same rate as 75 off 50, because both are 1.5 runs per ball.
Question 2: 90 runs off 72 balls
A batter scores 90 runs and faces 72 balls. What is their strike rate? Divide: 90 ÷ 72 = 1.25. Multiply: 1.25 × 100 = 125.00. The answer is 125.00. Check it backwards: 1.25 × 72 = 90 runs, which matches. This is strong scoring in a one-day game, where around 90 is the strong mark, and quick in a Test, where 50 to 60 is solid. It is just short of brisk in a T20, where the mark is 130 — a reminder that the same number reads differently in each format.
Question 3: 110 runs off 75 balls
A batter scores 110 runs and faces 75 balls. What is their strike rate? Divide: 110 ÷ 75 = 1.4667. Multiply: 1.4667 × 100 = 146.67. The answer is 146.67. Check it backwards: 146.67 ÷ 100 = 1.4667 runs per ball, and 1.4667 × 75 = 110.00 to the nearest hundredth, which matches. This one needs the rounding step, because 110 ÷ 75 does not come out even — keep four decimal places while you work, and round to two only at the end. Rounding earlier would give a slightly wrong answer.
Question 4: bowling strike rate
A bowler sends down 108 balls and takes 4 wickets. What is their bowling strike rate? This one works differently: bowling strike rate is balls divided by wickets, with no × 100. Divide: 108 ÷ 4 = 27.0. The answer is 27.0, meaning one wicket every 27 balls. For bowlers, lower is better — 27.0 is a wicket more often than 30.0, which is what 120 balls and 4 wickets gives. Do not multiply by 100 here, and do not judge it like a batting rate: a bowling strike rate of 27.0 is good, while a batting strike rate of 27.00 would be very slow.
Question 5: working backwards
A batter wants a strike rate of 140.00 and will face 50 balls. How many runs do they need? Work backwards: divide the target rate by 100 to get runs per ball, 140.00 ÷ 100 = 1.4, then multiply by the balls, 1.4 × 50 = 70. The answer is 70 runs. Check it forwards: 70 ÷ 50 × 100 = 140.00, which matches. This is the sum to use when chasing a target: the required rate tells you the runs per ball, and the balls left tell you the runs needed.
How to check your answers
Every batting answer can be checked with one backwards sum: divide the strike rate by 100, multiply by the balls, and the result must be the runs. For the questions above: 150.00 ÷ 100 × 30 = 45; 125.00 ÷ 100 × 72 = 90; 146.67 ÷ 100 × 75 = 110.00 to the nearest hundredth. If your check lands somewhere else, look at the balls first — overs counted instead of balls is the usual cause. And if you want to go further, make up your own questions from any scorecard: take any batter’s runs and balls, work out the rate, and check it against the calculator.
Frequently asked questions
How do I practise strike rate sums?
Take any scorecard innings, divide the runs by the balls, multiply by 100, then check backwards: strike rate ÷ 100 × balls must give the runs.
What is the bowling strike rate formula?
Balls bowled divided by wickets taken, with no × 100. A bowler with 108 balls and 4 wickets has a bowling strike rate of 27.0.
How many runs do I need for a strike rate of 140 in 50 balls?
A strike rate of 140 means 1.4 runs per ball, so 50 balls need 1.4 × 50 = 70 runs.
Why do answers have two decimal places?
So close rates can be told apart. 125.00 and 125.50 are different innings, and the extra digits keep them distinct.
More guides on the Cricket Strike Rate Calculator
- How to calculate cricket strike rate
- Cricket Strike Rate formula explained simply
- Cricket Strike Rate: worked example step by step
- Cricket Strike Rate for beginners
- Common mistakes when calculating cricket strike rate
- Cricket Strike Rate vs batting average: what's the difference
- How to use a cricket strike rate calculator
- Cricket Strike Rate quick reference table
- Cricket Strike Rate in real life: everyday examples
Try the Cricket Strike Rate Calculator — free, in your browser.