Cricket Net Run Rate quick reference table
Sometimes you do not want an explanation — you want the number. This page is three tables you can check in seconds: the run rate for common totals in a 50-over match, a set of worked net run rate examples, and the overs notation that trips people up. Keep it open next to the scorecard, find your row, and you have the answer without doing the division.
Every figure in these tables comes from the same formula the Cricket Net Run Rate Calculator uses: net run rate equals the scored rate minus the conceded rate, with overs counted in balls. If a row does not match your own working, check the overs first — that is where most mismatches come from.
Run rates for common totals in 50 overs
This table gives the run rate for totals you will see most often in a 50-over match. Find the runs, read the rate across. A total of 200 is 4.00 an over, 250 is 5.00, 280 is 5.60, 300 is 6.00 and 350 is 7.00. The gaps are even: every 50 runs over 50 overs is exactly one run per over, so a total of 225 sits halfway between 200 and 250 at 4.50, and a total of 275 sits halfway between 250 and 300 at 5.50.
| Runs in 50 overs | Run rate |
|---|---|
| 200 | 4.00 |
| 225 | 4.50 |
| 250 | 5.00 |
| 275 | 5.50 |
| 280 | 5.60 |
| 300 | 6.00 |
| 350 | 7.00 |
Worked net run rate examples
This table is the one to check your own calculation against. Each row shows a scored rate, a conceded rate and the net run rate that comes from subtracting them. The first row is the example used through most of these guides: 5.00 minus 4.00 is +1.00. The second row is the calculator’s own starting example: 5.60 minus 4.80 is +0.80. Scan for the row closest to your match and compare the size and the sign.
| Scored rate | Conceded rate | Net run rate |
|---|---|---|
| 5.00 | 4.00 | +1.00 |
| 5.60 | 4.80 | +0.80 |
| 6.00 | 4.80 | +1.20 |
| 4.50 | 4.25 | +0.25 |
| 3.00 | 4.00 | −1.00 |
| 6.00 | 6.00 | 0.00 |
| 7.50 | 5.00 | +2.50 |
Overs written in balls
Overs are written in balls, not decimals, and this table is the fix for the most common mistake in net run rate. The first column is the overs as written on a scorecard, the second is the same innings counted in balls, and the third is the decimal overs the division actually uses. 49.5 overs is 299 balls, or 49.83 overs. 30.3 overs is 183 balls, or 30.50 overs. A whole number of overs, like 20.0, is 120 balls, or 20.00 overs — the easy case.
| Overs as written | Balls | Overs for the sum |
|---|---|---|
| 49.5 | 299 | 49.83 |
| 30.3 | 183 | 30.50 |
| 20.0 | 120 | 20.00 |
| 35.4 | 214 | 35.67 |
How to use the tables
One more check worth doing: pick a row from the second table and work it backwards. Take the net run rate of +1.20 and the conceded rate of 4.80, add them, and you get the scored rate of 6.00. If the numbers do not add up, one of them was copied wrong. The tables are a shortcut, not a substitute for the method — but used together, the table and the calculator agree every time.
Use the first table when you only need one side of the sum — the run rate for a single innings. Use the second when you have both sides and want to check your subtraction. Use the third whenever the overs have balls after the point, because that is the step where answers go wrong. And when a total is not in the table, the rule still holds: divide the runs by the overs, do the same for the other side, and subtract.
Frequently asked questions
What is a good net run rate?
Any positive number is good, and the higher the better. A rate of +0.80 means the team scored almost a run per over faster than it conceded, which is a clear margin over a full match.
How do I read the overs table?
The first column is the overs as written on a scorecard, the second is the same innings counted in balls, and the third is the decimal overs the division actually uses.
Why is 49.5 overs not 49.50 overs?
Because the digit after the point counts balls, not tenths. 49.5 means 49 overs and 5 balls, which is 299 balls or 49.83 overs.
Do the tables work for T20 games?
Yes. The run-rate table covers any total and any overs; a T20 total of 120 in 20 overs is a rate of 6.00, the same maths as a 50-over total.
More guides on the Cricket Net Run Rate Calculator
- How to calculate cricket net run rate
- Cricket Net Run Rate formula explained simply
- Cricket Net Run Rate: worked example step by step
- Cricket Net Run Rate for beginners
- Common mistakes when calculating cricket net run rate
- Cricket Net Run Rate vs run rate: what's the difference
- How to use a cricket net run rate calculator
- Cricket Net Run Rate in real life: everyday examples
- Cricket Net Run Rate practice questions with answers
Try the Cricket Net Run Rate Calculator — free, in your browser.