← All blog posts

How to use a acceleration calculator

WhiteUI · A plain-English guide to the Acceleration Calculator

The Acceleration Calculator needs three numbers: the starting speed, the final speed, and the time. Type them in, and the answer appears at once — no button to press, no page to reload. It opens with a worked example already filled in: a starting speed of 0 m/s, a final speed of 20 m/s, and a time of 5 seconds, giving an acceleration of 4 m/s².

The four steps below take you from that starting point to your own answer, and show you how to read the result line and the bar underneath it.

Speed rising from 5 to 25 metres per second over 4 seconds
Entering 5 m/s, 25 m/s and 4 seconds gives (25 − 5) ÷ 4 = 5 m/s².

Step 1: enter the starting speed

The first box is labelled “Initial velocity”. Type the speed the object had at the start, in metres per second. A slider sits underneath the box and moves with it — drag the slider or type the number, and the other follows. If the object started from rest, leave it at 0. Negative numbers are allowed: a speed of −5 m/s means moving backwards at 5 m/s.

Step 2: enter the finishing speed

The second box is “Final velocity”, the speed at the end, also in metres per second. This is the number most people get from a speedometer or a question in a textbook. If the object ends up slower than it started, this number is smaller than the first, and the answer will come out negative — that is correct, it means slowing down.

Step 3: enter the time

The third box is “Time”, in seconds. It is the time between the two speeds being measured, not the time on a clock. It must be above zero: if you enter 0, the page shows a dash and asks for a time above zero, because dividing by zero has no answer. A time of 0.5 seconds works fine for a quick change.

Step 4: read the answer

The big number on the right is the acceleration in m/s². Underneath it, the page shows the change in speed it used — for the defaults, “Change in velocity: 20 m/s” — and the time, “Over 5 seconds.” A bar underneath shows the answer on a scale of 0 to 20 m/s², so you can see at a glance whether the number is small, like a bus pulling away, or large, like a sports car.

Worked example: try it yourself

Change the three boxes to 5 m/s, 25 m/s and 4 seconds. The change in speed is 25 − 5 = 20 m/s, and 20 ÷ 4 = 5 m/s². Check it by hand: the speed grows by 5 m/s every second, so after 4 seconds it has grown by 20 m/s, from 5 to 25. The calculator and the hand sum agree, which is the point of trying it.

a = (v − u) ÷ t
a = (25 − 5) ÷ 4
a = 20 ÷ 4 = 5 m/s²

The common mistake

The calculator expects metres per second, and the most common mistake is typing in km/h. A car going from 0 to 100 km/h in 5 seconds typed in as 100 m/s gives 100 ÷ 5 = 20 m/s² — faster than gravity, and plainly wrong. Convert first: 100 km/h is 27.78 m/s, and 27.78 ÷ 5 = 5.56 m/s². Divide km/h by 3.6 before you type, every time.

Frequently asked questions

Frequently asked questions

Is the calculator free?

Yes. It runs in your browser and costs nothing. No account, no download, and nothing is uploaded.

Does it store my numbers?

No. Everything runs in your browser. Closing the page clears the numbers.

What if I enter a negative speed?

That is allowed. A negative speed means moving in the opposite direction, and the formula handles it the same way.

Why does the answer show a dash?

The time is zero or missing. Enter a time above zero and the answer appears.

More guides on the Acceleration Calculator

Try it yourself

Try the Acceleration Calculator — free, in your browser.

Open the Acceleration Calculator