← All blog posts

Acceleration: worked example step by step

WhiteUI · A plain-English guide to the Acceleration Calculator

The best way to learn acceleration is to follow one sum all the way through. Here it is: a cyclist speeds up from 2 m/s to 8 m/s in 4 seconds. The answer is 1.5 m/s², and the four steps below show exactly how it is reached.

The formula is a = (v − u) ÷ t. You need three numbers before you start: the starting speed, the final speed, and the time. If you can find those three, the rest is one subtraction and one division. Try each step yourself on paper before reading the next one.

Speed rising from 2 to 8 metres per second over 4 seconds
A cyclist speeding up from 2 m/s to 8 m/s in 4 seconds gains 1.5 m/s of speed every second.

Step 1: list the three numbers

Write down what you know, with units: u is 2 m/s, v is 8 m/s, and t is 4 seconds. Writing them down first stops the most common error in this kind of sum — using the wrong number in the wrong place. Check both speeds are in the same unit before going on.

Step 2: find the change in speed

Subtract the starting speed from the final speed: 8 − 2 = 6 m/s. This is the change in speed — how much faster the cyclist is going at the end than at the start. If the answer to this subtraction is negative, the object is slowing down, and the final acceleration will be negative too.

Step 3: divide by the time

Divide the change in speed by the time: 6 ÷ 4 = 1.5 m/s². That is the acceleration. In plain words, the cyclist gains 1.5 m/s of speed every second: after one second the speed is 3.5 m/s, after two seconds it is 5 m/s, and after four seconds it is 8 m/s.

a = (v − u) ÷ t
a = (8 − 2) ÷ 4
a = 6 ÷ 4 = 1.5 m/s²

Step 4: check the answer

A quick check keeps silly mistakes out. The speed rose by 6 m/s over 4 seconds, so the answer should be a bit more than 1 — and 1.5 is. The unit should be m/s² and the sign positive, because the cyclist sped up. If you got a huge or negative number, go back to step 1 and check which numbers you used.

Two more, worked the same way

A car brakes from 30 m/s to 0 in 4 seconds. The change in speed is 0 − 30 = −30 m/s, and −30 ÷ 4 = −7.5 m/s². The minus sign says the car is slowing down. A train pulls out of a station, going from 0 to 25 m/s in 50 seconds. The change is 25 m/s, and 25 ÷ 50 = 0.5 m/s² — a gentle acceleration, which is why a train takes so long to reach full speed. Check both on the Acceleration Calculator by entering the same three numbers.

The common mistake

The mistake that spoils this kind of sum is swapping the two speeds. For the braking car, writing 30 − 0 instead of 0 − 30 gives +7.5 m/s² — the right size, the wrong sign. A positive answer claims the car is speeding up, when it is actually braking. Always subtract the starting speed from the final speed, in that order, and let the sign take care of itself.

Frequently asked questions

Frequently asked questions

How many decimal places should I give?

Two is enough, like 1.5 m/s² or 3.47 m/s². Keep the exact fraction, such as 6 ÷ 4, in your working.

What if the speeds are in km/h?

Divide each speed by 3.6 to turn km/h into m/s, then use the formula as normal. 90 km/h is 25 m/s.

Can I use the calculator to check my answer?

Yes. Enter the same starting speed, final speed and time into the Acceleration Calculator and compare its answer with yours.

What does 1.5 m/s² feel like?

Very gentle. A cyclist speeding up at 1.5 m/s² barely feels the push. A sports car at 7 m/s² pushes you firmly back into the seat.

More guides on the Acceleration Calculator

Try it yourself

Try the Acceleration Calculator — free, in your browser.

Open the Acceleration Calculator