Volume Calculator for homeowners and DIYers
Water tanks, room air volume and concrete slabs — volume shows up in every home job, and the Volume Calculator turns measurements into numbers you can order with.
Worked example — a water tank
A rectangular tank is 10 m long, 4 m wide and 3 m deep. Its volume is 10 × 4 × 3 = 120 m³, which is 120,000 litres of water.
Tank: 10 × 4 × 3 = 120 m³ = 120,000 litres
Concrete for a slab
A slab 5 m by 4 m and 10 cm thick needs 2 m³ of concrete. Ten centimetres is 0.1 m, and 5 × 4 × 0.1 = 2. Order a little extra for spillage — 10% extra is 0.2 m³, so order 2.2 m³.
Slab: 5 × 4 × 0.1 = 2 m³ With 10% extra: 2 × 1.1 = 2.2 m³
Room air volume
A room 6 m by 5 m with a 3 m ceiling holds 90 m³ of air. That number is what air conditioner sizing and ventilation start from.
Room: 6 × 5 × 3 = 90 m³
A round tank
A round tank with radius 1 m and height 2 m holds π × 1² × 2 = 6.28 m³, which is 6,283 litres.
Round tank: π × 1² × 2 = 6.28 m³ = 6,283 litres
At a glance
The mistake to avoid
Forgetting to convert centimetres to metres. A 10 cm slab is 0.1 m thick, not 10 m. If you type 10 as the thickness, the calculator gives 5 × 4 × 10 = 200 m³ of concrete — a hundred times too much. Divide centimetres by 100 first.
Calculator or the supplier’s chart — which to trust?
Tank and concrete suppliers print charts for their standard sizes, and for a standard size the chart is fine — a 1,000-litre overhead tank is 1 m³, whatever the chart says. But the moment your size is not on the chart, the chart cannot help you, and guessing between two chart rows is how people order the wrong tank. The calculator works for any size, standard or not.
Concrete is where the calculator earns its keep. A slab 4 m by 3 m and 15 cm thick needs 4 × 3 × 0.15 = 1.8 m³ of concrete — and 15 cm is 0.15 m, not 15, so the centimetre-to-metre conversion is doing real work here. Order a little extra for spillage and uneven ground: 10% extra is 0.18 m³, so order 1.98 m³. The chart gives you a round number; the calculator gives you your slab.
Slab: 4 × 3 × 0.15 = 1.8 m³ · With 10% extra: 1.8 × 1.1 = 1.98 m³
What to check before you order
Before money changes hands, run three checks. First, measure the inside of the tank, not the outside — the walls take up space, and the outside size is always bigger than the capacity. Second, convert centimetres to metres before you type: a 15 cm slab is 0.15 m thick, and typing 15 gives a hundred times too much concrete.
Third, sanity-check the size against a tank you know. A round tank with radius 0.6 m and height 1.2 m holds π × 0.6² × 1.2 = 1.36 m³, which is 1,357 litres — a little more than a standard 1,000-litre tank, which is about right for a tank that size. If your answer says a tank that small holds 13,570 litres, a decimal point slipped; if it says 136 litres, the × 1,000 step went missing.
Round tank: π × 0.6² × 1.2 = 1.36 m³ = 1,357 litres
Frequently asked questions
How much water does a tank 10 m by 4 m by 3 m hold?
120 cubic metres, which is 120,000 litres.
How much concrete do I need for a slab 5 m by 4 m and 10 cm thick?
2 cubic metres. 10 cm is 0.1 m, and 5 × 4 × 0.1 = 2.
What is the volume of a room 6 m by 5 m by 3 m?
90 cubic metres. That is the air volume of the room.
How many litres does a round tank with radius 1 m and height 2 m hold?
6,283 litres. The volume is 6.28 cubic metres, and each cubic metre is 1,000 litres.
More guides on the Volume Calculator
- How to use the Volume Calculator — step by step
- Volume Calculator explained with worked examples
- Volume Calculator formula — how it actually works
- Volume Calculator for beginners — start here
- Common mistakes people make with the Volume Calculator
- Volume Calculator vs doing it by hand — which is faster?
- volume calculator — the complete guide
- How to get an accurate result from the Volume Calculator
- Volume Calculator for students — with examples
Work out the volume of a box, a cylinder or a sphere — free, in your browser.