← All blog posts

Recurring deposit formula explained with an example

WhiteUI · A plain-English guide to recurring deposit calculator

The formula behind the Recurring Deposit Calculator looks short, but each part earns its place. Read it slowly once, and the calculator stops being a mystery.

The formula is: Maturity ≈ monthly deposit × a factor set by the interest rate and the number of months; the bank compounds interest (usually quarterly) on each deposit from the month it is paid in, so earlier deposits earn more than later ones. Invested = monthly deposit × months. Interest = maturity − invested.

Worked example, with every step shown: ₹5,000 a month at 7% for 24 months gives a maturity of ₹1,29,154 on ₹1,20,000 invested, so ₹9,154 of interest.

A second example, scaled from the first: ₹10,000 a month at the same rate and term gives ₹2,58,308 on ₹2,40,000 invested, so ₹18,308 of interest — exactly double, because every deposit doubles. A third check: ₹2,500 a month gives ₹64,577 on ₹60,000 invested, so ₹4,577 of interest.

The most useful check is direction, not precision: when you raise an input, does the answer move the way you expect? If it moves the other way, you have usually swapped two inputs or divided the wrong way round.

A note on scope: this guide is for estimation only — it is not financial advice. Recurring deposit rates and compounding rules differ between banks, and the maturity figure here is an estimate; check your bank’s current rate and terms before deciding.

Why the first deposit earns the most

Not every deposit in an RD earns the same interest, and that is the whole reason the formula works the way it does. The first ₹5,000 deposit sits in the account for all 24 months, earning interest the whole time. The last ₹5,000 deposit goes in a month before maturity and earns almost nothing. That is why ₹1,20,000 invested over two years grows to only ₹1,29,154 — the interest is ₹9,154, because most of the money was deposited late and had little time to earn. The same scaling holds at any size: at ₹7,500 a month the maturity is ₹1,93,731 on ₹1,80,000 invested, so ₹13,731 of interest, and at ₹15,000 a month it is ₹3,87,462 on ₹3,60,000, so ₹27,462. Every figure is the same multiple of the ₹5,000 example. The practical point is that starting earlier beats depositing more later: money put in during the first months earns for the full term, while money added near the end barely earns at all.

The rate check that matters most

Of the three inputs, the rate is the one most likely to be wrong, because it is the one people take from memory. Banks quote RD rates per year, and they change: the 7% in this guide is an example, not a promise, and your bank’s current rate may be higher or lower. Before you trust a maturity figure, check the rate on the bank’s own rate card for the term you chose, and confirm the compounding — most banks compound quarterly, which is what the figures here assume. Then run your deposit, the checked rate and the term through the calculator and compare the maturity with the bank’s quote. If they differ by more than a few rupees, the rate or the term is off, and the term is usually the culprit: 24 months entered as 2 years in a field that expects months gives a very different answer. Check the rate first, the units second, and the maturity will look after itself.

Frequently asked questions

Which part of the formula matters most?

The part you are most likely to mistype: the rate, the amount or the time period. Check that one first when a result surprises you.

Do I need to memorise the formula?

No. Understand what each input does and the calculator does the arithmetic.

What if my result looks wrong?

Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.

More guides on the Recurring Deposit Calculator

Try it yourself

Enter a monthly deposit, an interest rate and a term to see the maturity value of a recurring deposit.

Open the Recurring Deposit Calculator