← All tools/Tools/Home & DIY/Steel Weight Calculator
Steel Weight Calculator
How much your steel weighs — bars, plates and pipes, by the standard site formulas.
Theoretical / nominal weight for estimating only — confirm billing quantities by weighing and against IS 1786. Density used: 7,850 kg/m³.
Weight per metre
How it works
Round bar: weight (kg/m) = D² ÷ 162, D = diameter in mm (from steel density 7,850 kg/m³). Square bar: weight (kg/m) = side² × 0.00785, side in mm. Plate: weight (kg/m of length) = width × thickness × 0.00785, both in mm. Pipe: weight (kg/m) = (outer dia² − inner dia²) × 0.006165, inner dia = outer dia − 2 × wall thickness. Total weight (kg) = weight per metre × length (m) × number of pieces. 1 tonne = 1,000 kg.
Every shape starts from steel’s density, 7,850 kg per cubic metre. A round bar’s cross-section is π × D² ÷ 4, and once the units are worked through, its weight per metre is simply D² ÷ 162, with D the diameter in millimetres. A square bar uses side² × 0.00785, with the side in millimetres. A plate’s weight per metre of length is width × thickness × 0.00785, both in millimetres. A pipe uses (outer diameter² − inner diameter²) × 0.006165, where the inner diameter is the outer diameter minus twice the wall thickness. Total weight is weight per metre × length in metres × number of pieces, and 1,000 kg is one tonne. The formulas give the nominal weight of mild steel and TMT bars. They do not apply to stainless steel or aluminium, which have different densities, and they do not include rust, scale or cutting waste.
Worked example: a 12 mm round bar weighs 12² ÷ 162 = 144 ÷ 162 = 0.889 kg per metre, so a 12 m bar weighs 0.889 × 12 = 10.67 kg. A 16 mm bar is 16² ÷ 162 = 1.580 kg/m, so ten 12 m bars weigh 1.580 × 12 × 10 = 189.63 kg (0.19 tonnes). A 2 m × 1 m plate, 10 mm thick, weighs 2 × 1 × 0.01 × 7,850 = 157 kg.
Second example: 20 mm round bars for a column. One metre weighs 20² ÷ 162 = 2.47 kg, so a standard 12 m bar weighs 2.47 × 12 = 29.63 kg. Fifty such bars weigh 29.63 × 50 = 1,481.48 kg, or 1.48 tonnes — the figure to quote to the supplier and to check against the weighbridge slip when the truck arrives.
Frequently asked questions
Where does D² ÷ 162 come from?
From steel’s density, 7,850 kg/m³. A round bar’s cross-section is π × D² ÷ 4 mm²; times density and converted to kg per metre that works out to D² × 0.006165, and 1 ÷ 0.006165 is about 162 — so weight per metre is simply D² ÷ 162.
Why is the weight theoretical, not exact?
Bars are sold by nominal size, and real bars vary slightly in diameter and density, plus there is mill tolerance. The formula gives the standard nominal weight used for estimates and checking bills — weigh the bundle for the exact figure.
What is the weight of a standard 12 m bar?
A 12 mm bar is about 10.67 kg, a 16 mm bar about 18.96 kg and a 20 mm bar about 29.63 kg. A bundle of ten 12 m bars of 12 mm steel is about 106.7 kg, and the same bundle in 16 mm is about 189.6 kg. These are nominal weights from the D² ÷ 162 formula, so a real bundle can differ slightly — check it on a weighbridge if you are paying by weight.
How do I weigh a plate?
Multiply length × width × thickness (all in metres) by 7,850 kg/m³. A 2 m × 1 m plate, 10 mm thick, is 2 × 1 × 0.01 × 7,850 = 157 kg. The calculator does the same sum per metre of length.
Does this follow IS 1786?
The formula gives the nominal mass that IS 1786:2008 tables are built on (for example 0.888 kg/m for 12 mm). Actual rolled bars must be within the standard’s mass tolerance — this calculator is for estimating, not certification. Ask the supplier for the mill certificate if the grade is critical to your structure.
Common mistakes
The expensive mistakes are all unit mistakes. The first is entering the diameter in centimetres: a 12 mm bar entered as 1.2 gives a nonsense weight, because the 162 shortcut only works with millimetres. The second is using the radius instead of the diameter — the formula needs the full diameter, D, not half of it. The third is forgetting the number of pieces: the per-metre weight is not the total, and a bundle of ten 12 m bars weighs ten times one bar. The fourth is mixing up weight per metre with weight per bar when checking a supplier’s bill; compare like with like, and check the bundle on a weighbridge if the numbers differ by more than a few percent. The fifth is expecting the nominal weight to match the scale exactly: real bars vary slightly in diameter, and the IS 1786 standard allows a small mass tolerance. A bundle a little under nominal is normal; a bundle far under it is short supply, and that is worth taking up with the dealer.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.