← All tools/Tools/Home & DIY/Solar Panel Calculator

Solar Panel Calculator

How many solar panels your home needs — and the roof space they take.

kWh
W
hours
m²

Rough estimate only, not an installer quote. Real output depends on sunlight, roof angle and shading.

Panels needed

—

Daily need
Daily output

How it works

Daily use (kWh) = monthly kWh × 12 ÷ 365
Panels = daily kWh ÷ (panel kW × peak sun hours per day), rounded up
System size (kW) = panels × panel kW
Roof area = panels × area per panel

The sizing runs backwards from your bill. First, monthly use in kWh is turned into daily use: monthly kWh × 12 ÷ 365. Second, one panel’s daily output is its rating in kW multiplied by the peak sun hours — the equivalent hours of full sun your roof gets, usually 4 to 6 a day in most of India. Third, daily use divided by one panel’s output, rounded up, gives the number of panels. The system size is panels × panel kW, and the roof area is panels × the area per panel, 2.5 m² by default for a modern 550 W panel. The result sizes panels for daytime generation on a clear, shadow-free roof. It does not cover batteries, which are a separate calculation, and it does not allow for shade, the wrong tilt, dust or inverter losses, so treat it as a starting point.

Worked example: 300 kWh a month is 300 × 12 ÷ 365 = 9.86 kWh a day. With 550 W panels and 5 sun hours, each panel gives 0.55 × 5 = 2.75 kWh a day, so ceil(9.86 ÷ 2.75) = 4 panels — a 2.2 kW system needing about 10 m² of roof.

Second example: a home in Jaipur using 450 kWh a month, with 550 W panels and 5.5 peak sun hours. Daily use is 450 × 12 ÷ 365 = 14.79 kWh. One panel gives 0.55 × 5.5 = 3.03 kWh a day, so 14.79 ÷ 3.03 = 4.89, rounded up to 5 panels. That is a 2.75 kW system needing about 5 × 2.5 = 12.5 m² of shadow-free roof.

Frequently asked questions

What are peak sun hours?

The equivalent hours of full sun a day — about 4 to 6 in most of India. It is not the same as daylight hours: a 12-hour day with hazy mornings and cloudy afternoons may only add up to 5 peak sun hours. The number depends on your city, the season and how much haze or cloud you get.

Why round the panel count up?

You cannot buy part of a panel, and rounding up covers cloudy days and system losses. If the maths says 4.2 panels, 4 panels would leave you short on most days, while 5 gives a small margin. Adding one later means new rails, wiring and installer visits. Rounding up is standard practice for every installer.

Does this include battery storage?

No — this sizes the panels for daytime generation. Batteries are a separate calculation, because they depend on how much power you use at night and how long a power cut you want to ride through. A home that only needs fans and lights through a two-hour cut needs a far smaller battery than one running a fridge and a pump.

Is this an installer quote?

No — a rough estimate. Real output depends on roof angle, shading and the panel’s actual rating, and real prices depend on the brand, the inverter, the structure and your city. Use this calculator to check whether a quote’s panel count is in the right range, then get two or three written quotes before deciding.

What if my roof gets shade for part of the day?

Shade cuts output far more than most people expect — a shadow over one panel can drag down a whole string of panels wired together. If a water tank, parapet or neighbour’s floor shades the roof after 3 pm, either move the panels to the clear part or ask for micro-inverters or optimisers, which let each panel work on its own. Size the system only on the area that stays sunny through the middle of the day.

How to choose

Three choices matter more than the arithmetic. First, the panel wattage: most new Indian installations use 540–550 W panels, which need fewer panels and less roof rail than older 330 W ones. Second, the roof itself: you need shadow-free space facing roughly south, with room to walk between rows for cleaning. A roof shaded by a water tank or a neighbour’s floor for part of the day will produce far less than this calculator says, whatever the panel count. Third, the system type: a grid-tied system without batteries is the cheapest and suits homes with reliable daytime supply, while a hybrid with batteries costs much more and only pays when power cuts are frequent. Ask the installer for the expected yearly generation in kWh, not just the kW size.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.