How to use the Topsoil Calculator — step by step
Ordering topsoil starts with one question: how much do I need? Guess too little and the bed ends up half filled; guess too much and you pay for soil you have to store. The Topsoil Calculator answers that question from two numbers you can measure in a few minutes — the area to cover and the depth you want — and gives you the volume in cubic metres, the same volume in litres, and the number of 25-litre bags. Here are the five steps, using a 10 m² bed at 15 cm deep as the example.
At a glance
Step 1: measure the area
Measure the length and the width of the area in metres, then multiply them. A bed that is 5 metres long and 2 metres wide is 5 × 2 = 10 m². For a shape that is not a rectangle, split it into rectangles, work out each one, and add them together. The tool takes the area in square metres, so do this step before you open it.
Step 2: pick a depth
Choose how deep the topsoil should be, in centimetres. For a new lawn, 10 to 15 cm is typical. For a raised bed, 20 to 30 cm gives roots more room. Our example uses 15 cm, which suits a lawn or a shallow bed.
Step 3: type the area into the tool
Type 10 into the area box. The tool starts at 10 m², so if your area is 10 m² you may not need to change anything. You can type a number or move the slider underneath — both stay in step with each other.
Step 4: type the depth
Type 15 into the depth box. The answer updates straight away: 1.5 m³. Under the big number the tool also shows 1,500 litres and 60 bags of 25 litres, so you can order by whichever unit your supplier uses.
Step 5: check it before you order
Read the answer against a rough check. Ten square metres at 15 cm should be near one and a half cubic metres, because 10 × 0.15 = 1.5. And 60 bags at 25 litres each is 60 × 25 = 1,500 litres, which matches. If the answer looked like 15 m³, you would know a number was typed in the wrong unit.
Worked example: a raised bed
A bed is 4 metres long and 3 metres wide, and you want 25 cm of topsoil. The area is 4 × 3 = 12 m². The volume is 12 × 25 ÷ 100 = 3 m³, which is 3,000 litres, and 3,000 ÷ 25 = 120 bags. Type 12 and 25 into the tool and check that your answers match.
The common mistake
People type the depth in metres instead of centimetres — 0.15 instead of 15 — and get a tiny answer, or type 15 metres and get a huge one. The depth box wants centimetres. If your answer is a hundred times too big or too small, the depth unit is the first thing to check.
Frequently asked questions
What two numbers does the Topsoil Calculator need?
The area in square metres and the depth in centimetres. From those it works out the volume in cubic metres, the litres, and the number of 25-litre bags.
How much topsoil does a 10 m² bed at 15 cm need?
1.5 cubic metres, which is 1,500 litres or 60 bags of 25 litres. The maths is 10 × 15 ÷ 100 = 1.5.
What depth should I use for a lawn?
10 to 15 cm is typical for a new lawn. For a raised bed, use 20 to 30 cm so roots have more room.
How do I measure an area that is not a rectangle?
Split it into rectangles, work out the area of each one by multiplying length by width, and add the areas together before typing the total into the tool.
More guides on the Topsoil Calculator
- Topsoil Calculator explained with worked examples
- Topsoil Calculator formula — how it actually works
- Topsoil Calculator for beginners — start here
- Common mistakes people make with the Topsoil Calculator
- Topsoil Calculator vs doing it by hand — which is faster?
- topsoil calculator — the complete guide
- How to get an accurate result from the Topsoil Calculator
- Topsoil Calculator for students — with examples
- Topsoil Calculator for homeowners and DIYers
Try the Topsoil Calculator — free, in your browser.