← All tools/Tools/Garden & Outdoor/French Drain Calculator
French Drain Calculator
Work out how much gravel, pipe and fabric a French drain needs — and the fall it needs to drain — before you order materials.
Gravel needed
≈ 4.03 tons of gravel · 50 ft of 4 in pipe
What to buy
Order the gravel by the cubic yard (this page already adds 10% waste), one length of perforated pipe the same length as the trench, and landscape fabric to line the trench floor and sides. A 4 in pipe suits most home yards; use 6 in pipe for large or very wet areas.
How it works
Trench volume (cu ft) = length (ft) × width (ft) × depth (ft) Pipe volume (cu ft) = π × (pipe radius in ft)² × length Gravel (cu yd) = (trench − pipe) ÷ 27 × 1.10 (10% waste) Fabric (sq ft) = length × (width + 2 × depth) Fall (in) = length (ft) × slope % × 12 ÷ 100
50 ft trench, 12 in wide, 18 in deep, 4 in pipe: trench = 50 × 1 × 1.5 = 75 cu ft; pipe = π × (2/12)² × 50 = 4.36 cu ft; gravel = (75 − 4.36) ÷ 27 × 1.10 = 2.88 cu yd, about 4.03 tons at 1.4 tons per cubic yard. Fabric = 50 × (1 + 2 × 1.5) = 200 sq ft; fall at 1% slope = 50 × 0.01 × 12 = 6 in.
Gravel is ordered by the cubic yard (27 cu ft) with 10% added for waste and settling; tonnage uses the density you pick above. A French drain needs at least a 1% fall to move water. Last updated November 2026.
Frequently asked questions
How deep should a French drain be?
18 to 24 inches is typical for a yard drain — deep enough to collect groundwater but shallow enough to dig by hand. Go at least 12 inches deep, and below the frost line in cold climates so the pipe does not freeze.
How much gravel does a French drain need?
Take the trench volume, subtract the pipe volume, divide by 27 to get cubic yards, then add 10% for waste. A 50 ft trench, 12 in wide and 18 in deep with a 4 in pipe needs 2.88 cu yd — about 4.03 tons of gravel.
What size pipe should I use?
4 inch perforated pipe suits most home yards. Use 6 inch pipe for large areas, heavy clay soil or places where water stands after rain. The holes face down so water rises into the pipe from below.
Do I need landscape fabric?
Yes — line the trench with it before the gravel goes in. It keeps silt out of the gravel so the drain keeps flowing for years instead of clogging. You need length × (width + 2 × depth) of fabric; a 50 ft trench needs 200 sq ft.
What slope does a French drain need?
At least 1% — that is 1 inch of fall for every 8 feet of trench, or 6 inches over 50 feet. 2% drains better where the ground allows it. Without a fall, water sits in the pipe instead of flowing away.
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.