Random Number Generator for beginners — start here
A random number is a number nobody chose and nobody can predict: it could be any value in the range, and each value has the same chance. The Random Number Generator makes such numbers for you in a second, and this guide starts from zero: what the three settings mean, what to try first, and what the result means.
At a glance
Your first try: leave everything as it is
Open the tool and press Generate numbers before you change anything. The minimum shows 1, the maximum shows 10 and the count shows 5, so you get five numbers, each between 1 and 10 — a possible set is 3, 7, 1, 10, 4. The big line reads “5 numbers”, and the two smaller lines give the smallest and the largest of the set. That is a complete first result, and it shows the whole job the tool does.
The three settings, in plain words
The minimum is the smallest number the tool can pick, and the maximum is the largest. The count is how many numbers you get in one press. With the defaults, the minimum is 1, the maximum is 10 and the count is 5, so the tool picks five numbers, each from 1 to 10. Each setting has a slider beside its box, and moving the slider changes the same value as typing in the box.
Your second try: a dice roll
Set the minimum to 1, the maximum to 6 and the count to 1, then press Generate. You get one number from 1 to 6, which is the same as rolling a dice, and each face has a 1 in 6 chance, or 16.67%. Press Generate a few times and watch the numbers change: 4, then 2, then 6, then 1. No result is more likely than any other, and a 6 is no more likely after three rolls without one.
A third try: twenty numbers at once
Set the count to 20, the most the tool gives in one press, and keep the range at 1 to 10. You get 20 numbers, and you will see repeats: the same number appearing twice or three times in one set. That is expected, because there are only 10 values to pick from and 20 picks to fill. On average, any one value, such as 7, appears twice in 20 picks.
Reading the result
The result panel shows three things: the count, the numbers themselves as chips, and the smallest and largest. The smallest and largest are a quick check: with a range of 1 to 10, the smallest can never be below 1 and the largest can never be above 10. If you set a range of 1 to 100, the smallest and largest will sit somewhere inside 1 and 100, and the gap between them shows how spread out the set is.
The common mistake
Beginners sometimes count the values in a range by subtracting and forget to add 1 back: 10 minus 1 is 9, but the range from 1 to 10 holds 10 whole numbers, because both ends count. The same slip makes 1 to 6 look like 5 values when a dice has 6 faces, and 1 to 100 look like 99 when it is 100. Remember the rule: maximum minus minimum plus 1 is the count of values.
Frequently asked questions
What does the Random Number Generator show when it opens?
Five numbers, each between 1 and 10 inclusive. The minimum shows 1, the maximum shows 10, and the count shows 5.
How do I roll a dice with this tool?
Set the minimum to 1, the maximum to 6 and the count to 1, then press Generate numbers. Each face has a 1 in 6 chance, or 16.67%.
What is the most numbers the tool gives at once?
20 numbers. The count runs from 1 to 20, and the minimum and maximum run from 0 to 1,000.
Why do numbers repeat in one set?
Because each pick is independent and repeats are allowed. With 20 picks from 10 values, repeats are guaranteed.
More guides on the Random Number Generator
- How to use the Random Number Generator — step by step
- Random Number Generator explained with worked examples
- Random Number Generator formula — how it actually works
- Common mistakes people make with the Random Number Generator
- Random Number Generator vs doing it by hand — which is faster?
- Random Number Generator — the complete guide
- How to get an accurate result from the Random Number Generator
- Random Number Generator for students — with examples
- Random Number Generator for homeowners and DIYers
Try the Random Number Generator — free, in your browser.