← All blog posts

Common mistakes people make with the Temperature Converter

WhiteUI · A plain-English guide to the Temperature Converter

Temperature conversion looks simple, and the Temperature Converter makes it simple — but four small slips turn up again and again. Each one below shows the wrong answer, the right answer, and a check that catches it.

Mistake 1 — adding 32 before multiplying

For 25 °C, the wrong order gives (25 + 32) × 9/5 = 57 × 9/5 = 102.6 °F. The right order multiplies first: 25 × 9/5 = 45, then 45 + 32 = 77 °F. Always multiply first, then add 32.

Wrong: (25 + 32) × 9/5 = 102.6 °F
Right: 25 × 9/5 + 32 = 77 °F

Mistake 2 — mixing up 9/5 and 5/9

The two fractions go in opposite directions: 9/5 takes you from Celsius to Fahrenheit, 5/9 takes you back. Swap them and 25 °C comes out as 25 × 5/9 + 32 = 45.89 °F, which is far too cold for a warm day. If your Fahrenheit answer is smaller than your Celsius number, you have the fraction the wrong way round.

Mistake 3 — writing °K, or going below 0 K

Kelvin has no degree sign: it is 273.15 K, never 273.15 °K. And Kelvin stops at 0 K — there is no such temperature as −10 K. If a conversion gives you a negative Kelvin value, the “from” scale was wrong, because 0 K is absolute zero, −273.15 °C.

Mistake 4 — using 273 instead of 273.15

Rounding the constant to 273 is fine for a rough guess, but it costs you 0.15 degrees every time. 300 K is 26.85 °C, not 27 °C, and 0 °C is 273.15 K, not 273 K. The converter keeps the full 273.15, so use its answer when precision matters.

At a glance

25 °C converted two waysWrong order102.6 °FRight answer77 °F
Adding 32 before multiplying gives 102.6 °F for 25 °C. The right answer is 77 °F.

A quick check you can use

Memorise three anchors and test every answer against them: 0 °C = 32 °F, 100 °C = 212 °F, and −40 is −40 on both scales. If your conversion of a warm day comes out below 32 °F, or a freezing day comes out above it, something in the steps went wrong — check the order of the 32 and the direction of the fraction first.

Frequently asked questions

Why did I get 102.6 °F for 25 °C?

You added 32 before multiplying. Multiply by 9/5 first, then add 32: 25 × 9/5 + 32 = 77 °F.

Which way round do 9/5 and 5/9 go?

Use 9/5 when going from Celsius to Fahrenheit, and 5/9 when going from Fahrenheit to Celsius.

Do I write °K for Kelvin?

No. Kelvin is written as K with no degree sign — for example 273.15 K. It also never goes below 0 K.

Can Kelvin be negative?

No. Kelvin stops at 0 K, which is absolute zero, −273.15 °C. A negative Kelvin result means the input scale was wrong.

More guides on the Temperature Converter

Try it yourself

Run your last conversion through the converter again and check it against the fixes below.

Open the Temperature Converter