← All tools/Converters/Speed/Speed Converter
Speed Converter
Convert a speed between kilometres per hour, miles per hour, metres per second and knots.
Converted value
The same value in every unit
| Kilometres per hour | |
| Miles per hour | |
| Metres per second | |
| Knots |
How it works
Convert to metres per second first, then to the target unit: metres per second = value × factor(from unit) result = metres per second ÷ factor(to unit)
This converts speed units — to calculate speed, use the Speed Calculator.
Speed is distance divided by time, so every speed unit is a distance unit over a time unit. This converter routes every value through metres per second (m/s), the SI unit, and then out to the unit you want — that is why one entry shows the same speed in all four units at once. A kilometre per hour is 1,000 metres per 3,600 seconds, so 1 km/h equals 0.277778 m/s. A mile per hour is 1,609.344 metres per 3,600 seconds, so 1 mph equals 0.44704 m/s — which also means 1 mph is 1.609344 km/h. A knot is one nautical mile per hour, and a nautical mile is fixed at exactly 1,852 metres, so 1 knot equals 0.514444 m/s or 1.852 km/h. These are exact fixed factors, so the conversion has no rounding beyond the decimals shown, and it never depends on traffic, weather or the vehicle — it changes the unit, not the speed.
Worked example: 100 km/h is 100 × 0.277778 = 27.78 metres per second, and 27.78 ÷ 0.44704 = 62.14 miles per hour, or 27.78 ÷ 0.514444 = 54.00 knots.
Worked example 2: a car holds 80 km/h on NH48 between Mumbai and Pune. That is 80 × 0.277778 = 22.22 metres per second, 22.22 ÷ 0.44704 = 49.71 miles per hour, and 22.22 ÷ 0.514444 = 43.20 knots. At that pace the 150 km drive takes 150 ÷ 80 = 1.88 hours, or about 1 hour 53 minutes — before any toll or tea stop.
Common mistakes
The most common mistake is reading a speedometer number in the wrong unit: 100 mph is 160.93 km/h, so a US rental car doing 65 mph is already at 104.61 km/h — over the limit on most Indian expressways. The second is mixing up the two directions of the 1.609 factor: to go from km/h to mph you divide by 1.609344, and to go from mph to km/h you multiply. Dividing when you should multiply turns 100 km/h into 161 mph, which no family car reaches. The third is treating knots as km/h: a 20-knot wind is 37.04 km/h, nearly twice what the number suggests, and that matters when a monsoon gust hits a two-wheeler. Finally, remember a converter changes units, not reality: 80 km/h on a wet road needs a longer stopping distance than the same speed on a dry one, so use the converted number with the conditions in front of you.
Frequently asked questions
How fast is 100 km/h in mph?
62.14 mph. Divide kilometres per hour by 1.609344, or use this page’s factor route through metres per second.
What is a knot?
One nautical mile per hour, which is 1.852 km/h or 0.514444 m/s. It is the standard speed unit at sea and in the air.
Why go through metres per second?
Every unit has one fixed factor to metres per second, so one route converts any unit to any other without a table of pairs.
How fast is 120 km/h in mph?
74.56 mph — divide by 1.609344, or take 120 × 0.277778 = 33.33 m/s and divide by 0.44704. The quick mental check is that 100 km/h is about 62 mph, so 120 km/h is roughly 120 × 0.62 ≈ 74 mph.
What is a knot used for in India?
Knots are used at sea and in the air, not on Indian roads. A ship leaving Mumbai port at 12 knots is doing 12 × 1.852 = 22.22 km/h, and a flight cruising at 450 knots is doing about 833 km/h. If a number is in knots and you are driving, it is almost certainly not your speed — check the unit first.
More tools
Guides
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.