← All tools/Converters/Pressure

Pressure Converters

Convert between pressure units.

Pressure Converter

Convert pressure between Pa, bar, psi and atmospheres, via pascal as the base unit.

About these pressure converters

Pressure is measured in several units, and the right one depends on who is asking. Tyre gauges in India read in psi, diving tanks are rated in bar, engineers and weather reports often use kilopascals, and scientific work uses the pascal itself. This page holds the pressure converters, for moving a reading from one unit to another without doing the arithmetic by hand.

The units all measure the same thing — force spread over an area — so any pressure can be stated in any of them. One bar is 100 kilopascals and about 14.5 psi, and one standard atmosphere is 1.013 bar, near enough to one bar for everyday use. The Pressure Converter takes a value in pascals, bar, psi or atmospheres and gives it back in the unit you need, with the pascal as the base unit behind the conversion.

Pick the unit by the job. Car and bike tyres are checked in psi, so a gauge reading of 32 psi means more to most drivers than its bar equivalent. Scuba tanks and industrial air lines are quoted in bar, and weather maps use hectopascals — the same as millibars — for air pressure. When a manual, a gauge and a report disagree, convert first and compare in one unit.

Which one to use

There is one tool on this page: the Pressure Converter. Use it whenever a pressure reading is in the wrong unit for the job at hand.

Frequently asked questions

How many psi is 1 bar?

One bar is 14.5038 psi, so 2 bar is about 29 psi — roughly the pressure of a car tyre. One bar is also 100 kilopascals, which makes bar and kilopascals easy to move between.

What pressure should my car tyres be?

Most cars in India run at 30–35 psi, but the right figure is on the sticker inside the driver’s door frame or on the fuel flap — not on the tyre sidewall, which shows the maximum the tyre can take. Check tyres when they are cold, and use the Pressure Converter if your gauge reads in bar.

What is the difference between psi, bar and kPa?

They are three units for the same thing — force over an area. Psi is imperial and common on tyre gauges, bar is metric and common in India and Europe, and the kilopascal is the SI unit used in engineering and weather reports. Any pressure can be stated in any of them.

What unit do divers use for tank pressure?

Bar. A full scuba tank is usually around 200 bar, and dive tables and gauges in India and Europe are written in bar. A bar is also about the pressure added by every 10 metres of water depth.