Length Converter for homeowners and DIYers
DIY projects mix units constantly: a room measured in metres, timber sold in feet, a curtain rail listed in inches. The Length Converter sorts that out in seconds, so you buy the right length the first time.
Measuring a room
Measure the wall in metres, then convert to feet if the product you are buying is sold in feet. A wall that is 3.6 metres long is 3.6 ÷ 0.3048 = 11.811 feet. A room that is 10 feet wide is 10 × 0.3048 = 3.048 metres. Write both numbers on your shopping list — the shop’s tape measure may be in either unit.
Buying timber and boards
Timber is often sold in 2.4-metre lengths, which is 2.4 ÷ 0.3048 = 7.87402 feet — just under 8 feet. An 8-foot board is 8 × 0.3048 = 2.4384 metres, so it is a little longer than a 2.4-metre board. That 3.84-centimetre difference matters if you are cutting to fit a gap exactly: the 8-foot board covers it, the 2.4-metre board does not.
Working with inches
Small fittings are usually listed in inches or millimetres. One inch is 25.4 millimetres exactly, so a 2-inch screw is 50.8 millimetres and a 50-millimetre bolt is 1.9685 inches — just under 2 inches. When a fitting must match an existing hole, convert before you order, not after the parcel arrives.
3.6 m wall = 11.811 ft 10 ft room = 3.048 m 2.4 m board = 7.87402 ft 8 ft board = 2.4384 m
At a glance
The mistake to avoid
Rounding a length down before you buy. If a wall is 3.6 metres and you round it to 11 feet, you have allowed only 3.3528 metres — 24.72 centimetres short. For anything you cut to fit, round up, and keep a little extra: a board that is slightly too long can be trimmed, but one that is too short cannot be stretched.
Frequently asked questions
How many feet is a 3.6-metre wall?
11.811 feet. Divide 3.6 by 0.3048, since one foot is 0.3048 metres.
How many metres is a 10-foot room?
3.048 metres. Multiply 10 by 0.3048.
Is a 2.4-metre board the same as an 8-foot board?
No. A 2.4-metre board is 7.87402 feet, while an 8-foot board is 2.4384 metres — 3.84 centimetres longer.
How many millimetres is 2 inches?
50.8 millimetres. One inch is exactly 25.4 millimetres, so 2 × 25.4 = 50.8.
More guides on the Length Converter
- How to use the Length Converter — step by step
- Length Converter explained with worked examples
- Length Converter formula — how it actually works
- Length Converter for beginners — start here
- Common mistakes people make with the Length Converter
- Length Converter vs doing it by hand — which is faster?
- length converter — the complete guide
- How to get an accurate result from the Length Converter
- Length Converter for students — with examples
Convert your room measurements before you buy timber, flooring, or paint.